Download JAR files tagged by section with all dependencies

An SLF4J log provider that directly implements the SLF4J API and provides logging output suitable for console output (i.e. not to a file). The width of the output is restricted to the terminal width, with the possibility to split the width into multiple sections, each which may be a fixed width, or 'auto' which divides all remaining space amongst other automative sections. Any log attribute fields may then be placed in any of the sections with a particular alignment. Text will not overflow out of its section. Sections may be colour or styled with other text attributes, including hyperlinks for supported termins. Emoticons and other graphical sequences may be used in place of log levels. Configuration is achieved via 'ini' type files, which are reload automatically when changed.

Class for boosting a classifier using the MultiBoosting method. MultiBoosting is an extension to the highly successful AdaBoost technique for forming decision committees. MultiBoosting can be viewed as combining AdaBoost with wagging. It is able to harness both AdaBoost's high bias and variance reduction with wagging's superior variance reduction. Using C4.5 as the base learning algorithm, Multi-boosting is demonstrated to produce decision committees with lower error than either AdaBoost or wagging significantly more often than the reverse over a large representative cross-section of UCI data sets. It offers the further advantage over AdaBoost of suiting parallel execution. For more information, see Geoffrey I. Webb (2000). MultiBoosting: A Technique for Combining Boosting and Wagging. Machine Learning. Vol.40(No.2).

RuSH is an efficient, reliable, and easy adaptable rule-based sentence segmentation solution. It is specifically designed to handle the telegraphic written text in clinical note. It leverages a nested hash table to execute simultaneous rule processing, which reduces the impact of the rule-base growth on execution time and eliminates the effect of rule order on accuracy. If you wish to cite RuSH in a publication, please use: Jianlin Shi ; Danielle Mowery ; Kristina M. Doing-Harris ; John F. Hurdle.RuSH: a Rule-based Segmentation Tool Using Hashing for Extremely Accurate Sentence Segmentation of Clinical Text. AMIA Annu Symp Proc. 2016: 1587. The full text can be found at: https://knowledge.amia.org/amia-63300-1.3360278/t005-1.3362920/f005-1.3362921/2495498-1.3363244/2495498-1.3363247?timeStamp=1479743941616 This version allows defining section scopes for sentence segmentation.

Xerces2 is the next generation of high performance, fully compliant XML parsers in the Apache Xerces family. This new version of Xerces introduces the Xerces Native Interface (XNI), a complete framework for building parser components and configurations that is extremely modular and easy to program. The Apache Xerces2 parser is the reference implementation of XNI but other parser components, configurations, and parsers can be written using the Xerces Native Interface. For complete design and implementation documents, refer to the XNI Manual. Xerces2 is a fully conforming XML Schema 1.0 processor. A partial experimental implementation of the XML Schema 1.1 Structures and Datatypes Working Drafts (December 2009) and an experimental implementation of the XML Schema Definition Language (XSD): Component Designators (SCD) Candidate Recommendation (January 2010) are provided for evaluation. For more information, refer to the XML Schema page. Xerces2 also provides a complete implementation of the Document Object Model Level 3 Core and Load/Save W3C Recommendations and provides a complete implementation of the XML Inclusions (XInclude) W3C Recommendation. It also provides support for OASIS XML Catalogs v1.1. Xerces2 is able to parse documents written according to the XML 1.1 Recommendation, except that it does not yet provide an option to enable normalization checking as described in section 2.13 of this specification. It also handles namespaces according to the XML Namespaces 1.1 Recommendation, and will correctly serialize XML 1.1 documents if the DOM level 3 load/save APIs are in use.

Xerces2 is the next generation of high performance, fully compliant XML parsers in the Apache Xerces family. This new version of Xerces introduces the Xerces Native Interface (XNI), a complete framework for building parser components and configurations that is extremely modular and easy to program. The Apache Xerces2 parser is the reference implementation of XNI but other parser components, configurations, and parsers can be written using the Xerces Native Interface. For complete design and implementation documents, refer to the XNI Manual. Xerces2 is a fully conforming XML Schema 1.0 processor. A partial experimental implementation of the XML Schema 1.1 Structures and Datatypes Working Drafts (December 2009) and an experimental implementation of the XML Schema Definition Language (XSD): Component Designators (SCD) Candidate Recommendation (January 2010) are provided for evaluation. For more information, refer to the XML Schema page. Xerces2 also provides a complete implementation of the Document Object Model Level 3 Core and Load/Save W3C Recommendations and provides a complete implementation of the XML Inclusions (XInclude) W3C Recommendation. It also provides support for OASIS XML Catalogs v1.1. Xerces2 is able to parse documents written according to the XML 1.1 Recommendation, except that it does not yet provide an option to enable normalization checking as described in section 2.13 of this specification. It also handles namespaces according to the XML Namespaces 1.1 Recommendation, and will correctly serialize XML 1.1 documents if the DOM level 3 load/save APIs are in use.

Xerces2 provides high performance, fully compliant XML parsers in the Apache Xerces family. This new version of Xerces continues to build upon the Xerces Native Interface (XNI), a complete framework for building parser components and configurations that is extremely modular and easy to program. The Apache Xerces2 parser is the reference implementation of XNI but other parser components, configurations, and parsers can be written using the Xerces Native Interface. For complete design and implementation documents, refer to the XNI Manual. Xerces2 provides fully conforming XML Schema 1.0 and 1.1 processors. An experimental implementation of the "XML Schema Definition Language (XSD): Component Designators (SCD) Candidate Recommendation (January 2010)" is also provided for evaluation. For more information, refer to the XML Schema page. Xerces2 also provides a complete implementation of the Document Object Model Level 3 Core and Load/Save W3C Recommendations and provides a complete implementation of the XML Inclusions (XInclude) W3C Recommendation. It also provides support for OASIS XML Catalogs v1.1. Xerces2 is able to parse documents written according to the XML 1.1 Recommendation, except that it does not yet provide an option to enable normalization checking as described in section 2.13 of this specification. It also handles namespaces according to the XML Namespaces 1.1 Recommendation, and will correctly serialize XML 1.1 documents if the DOM level 3 load/save APIs are in use.

Xerces2 is the next generation of high performance, fully compliant XML parsers in the Apache Xerces family. This new version of Xerces introduces the Xerces Native Interface (XNI), a complete framework for building parser components and configurations that is extremely modular and easy to program. The Apache Xerces2 parser is the reference implementation of XNI but other parser components, configurations, and parsers can be written using the Xerces Native Interface. For complete design and implementation documents, refer to the XNI Manual. Xerces2 is a fully conforming XML Schema 1.0 processor. A partial experimental implementation of the XML Schema 1.1 Structures and Datatypes Working Drafts (December 2009) and an experimental implementation of the XML Schema Definition Language (XSD): Component Designators (SCD) Candidate Recommendation (January 2010) are provided for evaluation. For more information, refer to the XML Schema page. Xerces2 also provides a complete implementation of the Document Object Model Level 3 Core and Load/Save W3C Recommendations and provides a complete implementation of the XML Inclusions (XInclude) W3C Recommendation. It also provides support for OASIS XML Catalogs v1.1. Xerces2 is able to parse documents written according to the XML 1.1 Recommendation, except that it does not yet provide an option to enable normalization checking as described in section 2.13 of this specification. It also handles namespaces according to the XML Namespaces 1.1 Recommendation, and will correctly serialize XML 1.1 documents if the DOM level 3 load/save APIs are in use.

Apache Commons Crypto is a cryptographic library optimized with AES-NI (Advanced Encryption Standard New Instructions). It provides Java API for both cipher level and Java stream level. Developers can use it to implement high performance AES encryption/decryption with the minimum code and effort. Please note that Crypto doesn't implement the cryptographic algorithm such as AES directly. It wraps to OpenSSL or JCE which implement the algorithms. Features -------- 1. Cipher API for low level cryptographic operations. 2. Java stream API (CryptoInputStream/CryptoOutputStream) for high level stream encryption/decryption. 3. Both optimized with high performance AES encryption/decryption. (1400 MB/s - 1700 MB/s throughput in modern Xeon processors). 4. JNI-based implementation to achieve comparable performance to the native C/C++ version based on OpenSsl. 5. Portable across various operating systems (currently only Linux/MacOSX/Windows); Apache Commons Crypto loads the library according to your machine environment (it checks system properties, `os.name` and `os.arch`). 6. Simple usage. Add the commons-crypto-(version).jar file to your classpath. Export restrictions ------------------- This distribution includes cryptographic software. The country in which you currently reside may have restrictions on the import, possession, use, and/or re-export to another country, of encryption software. BEFORE using any encryption software, please check your country's laws, regulations and policies concerning the import, possession, or use, and re-export of encryption software, to see if this is permitted. See <http://www.wassenaar.org/> for more information. The U.S. Government Department of Commerce, Bureau of Industry and Security (BIS), has classified this software as Export Commodity Control Number (ECCN) 5D002.C.1, which includes information security software using or performing cryptographic functions with asymmetric algorithms. The form and manner of this Apache Software Foundation distribution makes it eligible for export under the License Exception ENC Technology Software Unrestricted (TSU) exception (see the BIS Export Administration Regulations, Section 740.13) for both object code and source code. The following provides more details on the included cryptographic software: * Commons Crypto use [Java Cryptography Extension](http://docs.oracle.com/javase/8/docs/technotes/guides/security/crypto/CryptoSpec.html) provided by Java * Commons Crypto link to and use [OpenSSL](https://www.openssl.org/) ciphers

# Pact Spring/JUnit runner ## Overview Library provides ability to play contract tests against a provider using Spring &amp; JUnit. This library is based on and references the JUnit package, so see the [Pact JUnit 4](../pact-jvm-provider-junit) or [Pact JUnit 5](../pact-jvm-provider-junit5) providers for more details regarding configuration using JUnit. Supports: - Standard ways to load pacts from folders and broker - Easy way to change assertion strategy - Spring Test MockMVC Controllers and ControllerAdvice using MockMvc standalone setup. - MockMvc debugger output - Multiple @State runs to test a particular Provider State multiple times - **au.com.dius.pact.provider.junit.State** custom annotation - before each interaction that requires a state change, all methods annotated by `@State` with appropriate the state listed will be invoked. **NOTE:** For publishing provider verification results to a pact broker, make sure the Java system property `pact.provider.version` is set with the version of your provider. ## Example of MockMvc test ```java @RunWith(RestPactRunner.class) // Custom pact runner, child of PactRunner which runs only REST tests @Provider(&quot;myAwesomeService&quot;) // Set up name of tested provider @PactFolder(&quot;pacts&quot;) // Point where to find pacts (See also section Pacts source in documentation) public class ContractTest { //Create an instance of your controller. We cannot autowire this as we&apos;re not using (and don&apos;t want to use) a Spring test runner. @InjectMocks private AwesomeController awesomeController = new AwesomeController(); //Mock your service logic class. We&apos;ll use this to create scenarios for respective provider states. @Mock private AwesomeBusinessLogic awesomeBusinessLogic; //Create an instance of your controller advice (if you have one). This will be passed to the MockMvcTarget constructor to be wired up with MockMvc. @InjectMocks private AwesomeControllerAdvice awesomeControllerAdvice = new AwesomeControllerAdvice(); //Create a new instance of the MockMvcTarget and annotate it as the TestTarget for PactRunner @TestTarget public final MockMvcTarget target = new MockMvcTarget(); @Before //Method will be run before each test of interaction public void before() { //initialize your mocks using your mocking framework MockitoAnnotations.initMocks(this); //configure the MockMvcTarget with your controller and controller advice target.setControllers(awesomeController); target.setControllerAdvice(awesomeControllerAdvice); } @State(&quot;default&quot;, &quot;no-data&quot;) // Method will be run before testing interactions that require &quot;default&quot; or &quot;no-data&quot; state public void toDefaultState() { target.setRunTimes(3); //let&apos;s loop through this state a few times for a 3 data variants when(awesomeBusinessLogic.getById(any(UUID.class))) .thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.ONE)) .thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.TWO)) .thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.THREE)); } @State(&quot;error-case&quot;) public void SingleUploadExistsState_Success() { target.setRunTimes(1); //tell the runner to only loop one time for this state //you might want to throw exceptions to be picked off by your controller advice when(awesomeBusinessLogic.getById(any(UUID.class))) .then(i -&gt; { throw new NotCoolException(i.getArgumentAt(0, UUID.class).toString()); }); } } ``` ## Using a Spring runner (version 3.5.7+) You can use `SpringRestPactRunner` instead of the default Pact runner to use the Spring test annotations. This will allow you to inject or mock spring beans. For example: ```java @RunWith(SpringRestPactRunner.class) @Provider(&quot;pricing&quot;) @PactBroker(protocol = &quot;https&quot;, host = &quot;${pactBrokerHost}&quot;, port = &quot;443&quot;, authentication = @PactBrokerAuth(username = &quot;${pactBrokerUser}&quot;, password = &quot;${pactBrokerPassword}&quot;)) @SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.DEFINED_PORT) public class PricingServiceProviderPactTest { @MockBean private ProductClient productClient; // This will replace the bean with a mock in the application context @TestTarget @SuppressWarnings(value = &quot;VisibilityModifier&quot;) public final Target target = new HttpTarget(8091); @State(&quot;Product X010000021 exists&quot;) public void setupProductX010000021() throws IOException { reset(productClient); ProductBuilder product = new ProductBuilder() .withProductCode(&quot;X010000021&quot;); when(productClient.fetch((Set&lt;String&gt;) argThat(contains(&quot;X010000021&quot;)), any())).thenReturn(product); } @State(&quot;the product code X00001 can be priced&quot;) public void theProductCodeX00001CanBePriced() throws IOException { reset(productClient); ProductBuilder product = new ProductBuilder() .withProductCode(&quot;X00001&quot;); when(productClient.find((Set&lt;String&gt;) argThat(contains(&quot;X00001&quot;)), any())).thenReturn(product); } } ``` ### Using Spring Context Properties (version 3.5.14+) From version 3.5.14 onwards, the SpringRestPactRunner will look up any annotation expressions (like `${pactBrokerHost}`) above) from the Spring context. For Springboot, this will allow you to define the properties in the application test properties. For instance, if you create the following `application.yml` in the test resources: ```yaml pactbroker: host: &quot;your.broker.local&quot; port: &quot;443&quot; protocol: &quot;https&quot; auth: username: &quot;&lt;your broker username&gt;&quot; password: &quot;&lt;your broker password&gt;&quot; ``` Then you can use the defaults on the `@PactBroker` annotation. ```java @RunWith(SpringRestPactRunner.class) @Provider(&quot;My Service&quot;) @PactBroker( authentication = @PactBrokerAuth(username = &quot;${pactbroker.auth.username}&quot;, password = &quot;${pactbroker.auth.password}&quot;) ) @SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT) public class PactVerificationTest { ``` ### Using a random port with a Springboot test (version 3.5.14+) If you use a random port in a springboot test (by setting `SpringBootTest.WebEnvironment.RANDOM_PORT`), you can use the `SpringBootHttpTarget` which will get the application port from the spring application context. For example: ```java @RunWith(SpringRestPactRunner.class) @Provider(&quot;My Service&quot;) @PactBroker @SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT) public class PactVerificationTest { @TestTarget public final Target target = new SpringBootHttpTarget(); } ```

# Pact Spring/JUnit runner ## Overview Library provides ability to play contract tests against a provider using Spring &amp; JUnit. This library is based on and references the JUnit package, so see [junit provider support](pact-jvm-provider-junit) for more details regarding configuration using JUnit. Supports: - Standard ways to load pacts from folders and broker - Easy way to change assertion strategy - Spring Test MockMVC Controllers and ControllerAdvice using MockMvc standalone setup. - MockMvc debugger output - Multiple @State runs to test a particular Provider State multiple times - **au.com.dius.pact.provider.junit.State** custom annotation - before each interaction that requires a state change, all methods annotated by `@State` with appropriate the state listed will be invoked. **NOTE:** For publishing provider verification results to a pact broker, make sure the Java system property `pact.provider.version` is set with the version of your provider. ## Example of MockMvc test ```java @RunWith(RestPactRunner.class) // Custom pact runner, child of PactRunner which runs only REST tests @Provider(&quot;myAwesomeService&quot;) // Set up name of tested provider @PactFolder(&quot;pacts&quot;) // Point where to find pacts (See also section Pacts source in documentation) public class ContractTest { //Create an instance of your controller. We cannot autowire this as we&apos;re not using (and don&apos;t want to use) a Spring test runner. @InjectMocks private AwesomeController awesomeController = new AwesomeController(); //Mock your service logic class. We&apos;ll use this to create scenarios for respective provider states. @Mock private AwesomeBusinessLogic awesomeBusinessLogic; //Create an instance of your controller advice (if you have one). This will be passed to the MockMvcTarget constructor to be wired up with MockMvc. @InjectMocks private AwesomeControllerAdvice awesomeControllerAdvice = new AwesomeControllerAdvice(); //Create a new instance of the MockMvcTarget and annotate it as the TestTarget for PactRunner @TestTarget public final MockMvcTarget target = new MockMvcTarget(); @Before //Method will be run before each test of interaction public void before() { //initialize your mocks using your mocking framework MockitoAnnotations.initMocks(this); //configure the MockMvcTarget with your controller and controller advice target.setControllers(awesomeController); target.setControllerAdvice(awesomeControllerAdvice); } @State(&quot;default&quot;, &quot;no-data&quot;) // Method will be run before testing interactions that require &quot;default&quot; or &quot;no-data&quot; state public void toDefaultState() { target.setRunTimes(3); //let&apos;s loop through this state a few times for a 3 data variants when(awesomeBusinessLogic.getById(any(UUID.class))) .thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.ONE)) .thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.TWO)) .thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.THREE)); } @State(&quot;error-case&quot;) public void SingleUploadExistsState_Success() { target.setRunTimes(1); //tell the runner to only loop one time for this state //you might want to throw exceptions to be picked off by your controller advice when(awesomeBusinessLogic.getById(any(UUID.class))) .then(i -&gt; { throw new NotCoolException(i.getArgumentAt(0, UUID.class).toString()); }); } } ``` ## Using a Spring runner (version 3.5.7+) You can use `SpringRestPactRunner` instead of the default Pact runner to use the Spring test annotations. This will allow you to inject or mock spring beans. For example: ```java @RunWith(SpringRestPactRunner.class) @Provider(&quot;pricing&quot;) @PactBroker(protocol = &quot;https&quot;, host = &quot;${pactBrokerHost}&quot;, port = &quot;443&quot;, authentication = @PactBrokerAuth(username = &quot;${pactBrokerUser}&quot;, password = &quot;${pactBrokerPassword}&quot;)) @SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.DEFINED_PORT) public class PricingServiceProviderPactTest { @MockBean private ProductClient productClient; // This will replace the bean with a mock in the application context @TestTarget @SuppressWarnings(value = &quot;VisibilityModifier&quot;) public final Target target = new HttpTarget(8091); @State(&quot;Product X010000021 exists&quot;) public void setupProductX010000021() throws IOException { reset(productClient); ProductBuilder product = new ProductBuilder() .withProductCode(&quot;X010000021&quot;); when(productClient.fetch((Set&lt;String&gt;) argThat(contains(&quot;X010000021&quot;)), any())).thenReturn(product); } @State(&quot;the product code X00001 can be priced&quot;) public void theProductCodeX00001CanBePriced() throws IOException { reset(productClient); ProductBuilder product = new ProductBuilder() .withProductCode(&quot;X00001&quot;); when(productClient.find((Set&lt;String&gt;) argThat(contains(&quot;X00001&quot;)), any())).thenReturn(product); } } ``` ### Using Spring Context Properties (version 3.5.14+) From version 3.5.14 onwards, the SpringRestPactRunner will look up any annotation expressions (like `${pactBrokerHost}`) above) from the Spring context. For Springboot, this will allow you to define the properties in the application test properties. For instance, if you create the following `application.yml` in the test resources: ```yaml pactbroker: host: &quot;your.broker.local&quot; port: &quot;443&quot; protocol: &quot;https&quot; auth: username: &quot;&lt;your broker username&gt;&quot; password: &quot;&lt;your broker password&gt;&quot; ``` Then you can use the defaults on the `@PactBroker` annotation. ```java @RunWith(SpringRestPactRunner.class) @Provider(&quot;My Service&quot;) @PactBroker( authentication = @PactBrokerAuth(username = &quot;${pactbroker.auth.username}&quot;, password = &quot;${pactbroker.auth.password}&quot;) ) @SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT) public class PactVerificationTest { ``` ### Using a random port with a Springboot test (version 3.5.14+) If you use a random port in a springboot test (by setting `SpringBootTest.WebEnvironment.RANDOM_PORT`), you can use the `SpringBootHttpTarget` which will get the application port from the spring application context. For example: ```java @RunWith(SpringRestPactRunner.class) @Provider(&quot;My Service&quot;) @PactBroker @SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT) public class PactVerificationTest { @TestTarget public final Target target = new SpringBootHttpTarget(); } ```