Download JAR files tagged by multiple with all dependencies
axis2-parent from group org.apache.axis2 (version 1.6.3)
Axis2 is an effort to re-design and totally re-implement both Axis/Java and
(eventually) Axis/C++ on a new architecture. Evolving from the now standard "handler chain"
model which Axis1 pioneered, Axis2 is developing a more flexible pipeline architecture which
can yet be managed and packaged in a more organized manner. This new design acknowledges the
maturing of the Web services space in terms of new protocols such as WS-ReliableMessaging,
WS-Security and WS-Addressing that are built on top of the base SOAP system. At the time
Axis1 was designed, while it was fully expected that other protocols such as
WS-ReliableMessaging would be built on top of it, there was not a proper extension
architecture defined to enable clean composition of such layers. Thus, one of the key
motivations for Axis2 is to provide a clean and simple environment for like Apache Sandesha
and Apache WSS4J to layer on top of the base SOAP system. Another driving force for Axis2 as
well as the move away from RPC oriented Web services towards more document-oriented, message
style asynchronous service interactions. The Axis2 project is centered on a new
representation for SOAP messages called AXIOM (AXIs Object Model). AXIOM consists of two
parts: a complete XML Infoset representation and a SOAP Infoset representation on top of
that. The XML Infoset representation provides a JDOM-like simple API but is built on a
deferred model via a StAX-based (Streaming API for XML) pull parsing API. A key feature of
AXIOM is that it allows one to stop building the XML tree and just access the pull stream
directly; thus enabling both maximum flexibility and maximum performance. This approach
allows us to support multiple levels of abstraction for consuming and offering Web services:
using plain AXIOM, using generated code and statically data-bound data types and so on. At
the time of Axis1's design, RPC-style, synchronous, request-response interactions were the
order of the day for Web services. Today service interactions are much more message
-oriented and exploit many different message exchange patterns. The Axis2 engine
architecture is careful to not build in any assumptions of request-response patterns to
ensure that it can be used easily to support arbitrary message exchange
patterns.
Group: org.apache.axis2 Artifact: axis2-parent
Show all versions
Show all versions
There is no JAR file uploaded. A download is not possible! Please choose another version.
0 downloads
Artifact axis2-parent
Group org.apache.axis2
Version 1.6.3
Last update 27. June 2015
Organization not specified
URL http://axis.apache.org/axis2/java/core/
License not specified
Dependencies amount 0
Dependencies No dependencies
There are maybe transitive dependencies!
Group org.apache.axis2
Version 1.6.3
Last update 27. June 2015
Organization not specified
URL http://axis.apache.org/axis2/java/core/
License not specified
Dependencies amount 0
Dependencies No dependencies
There are maybe transitive dependencies!
xapi-gwt-parent from group net.wetheinter (version 0.5)
This is the main aggregator for all gwt submodules.
All gwt-specific code resides here.
Submodules should avoid inheriting from each other unless necessary.
This goes for maven structure and gwt.xml structure.
The super module is where our jre emulation layer and super-source live;
all modules should inherit super, and a minimum of other modules.
Some modules, like injection, are fulfilling an api in the core module,
and should be accessed only through core service interfaces.
Other modules, like reflection, are capable of being standalone inherits,
but can benefit from core utilities like injection,
so, two (or more) .gwt.xml modules may be provided.
As XApi nears 1.0, all submodules will be routinely stitched together into
an uber-jar, in order to have a single jar with a single gwt module
that can provide all of the services at once.
Internal projects will never use the uber jar, to help maintain modularity,
but external projects that want to use more than one service
will certainly prefer inheriting one artifact, instead of twelve.
When distributed in uber-jar format, it will likely be necessary for
either the uber jar, or just xapi-gwt-api.jar to appear before gwt-dev
on your compile-time classpath. If using gwt-maven-plugin, the
gwtFirstOnClasspath option may become problematic. If so, we will provide
a forked gwt-plugin to make sure our compiler enhancements are included in
the build process.
There is also work going on to make a super-source-everything plugin,
which will use maven to find source files, and generate synthetic .gwt.xml
for you, as part of an effort to create a wholly unified programming
environment. In addition to java-to-javascript, we intend to compile
java-to-java and possibly other languages, like go; imagine implementing
gwt deferred binding to eliminate cross-platform differences between
server environments, or operating systems, or versions of a platform,
or anywhere else a core api needs to bind to multiple implementations,
depending on the runtime environment.
Group: net.wetheinter Artifact: xapi-gwt-parent
Show all versions
Show all versions
There is no JAR file uploaded. A download is not possible! Please choose another version.
0 downloads
Artifact xapi-gwt-parent
Group net.wetheinter
Version 0.5
Last update 30. May 2015
Organization not specified
URL WeTheInter.net
License not specified
Dependencies amount 0
Dependencies No dependencies
There are maybe transitive dependencies!
Group net.wetheinter
Version 0.5
Last update 30. May 2015
Organization not specified
URL WeTheInter.net
License not specified
Dependencies amount 0
Dependencies No dependencies
There are maybe transitive dependencies!
pact-jvm-provider-spring_2.12 from group au.com.dius (version 3.6.15)
# Pact Spring/JUnit runner
## Overview
Library provides ability to play contract tests against a provider using Spring & JUnit.
This library is based on and references the JUnit package, so see the [Pact JUnit 4](../pact-jvm-provider-junit) or [Pact JUnit 5](../pact-jvm-provider-junit5) providers for more details regarding configuration using JUnit.
Supports:
- Standard ways to load pacts from folders and broker
- Easy way to change assertion strategy
- Spring Test MockMVC Controllers and ControllerAdvice using MockMvc standalone setup.
- MockMvc debugger output
- Multiple @State runs to test a particular Provider State multiple times
- **au.com.dius.pact.provider.junit.State** custom annotation - before each interaction that requires a state change,
all methods annotated by `@State` with appropriate the state listed will be invoked.
**NOTE:** For publishing provider verification results to a pact broker, make sure the Java system property `pact.provider.version`
is set with the version of your provider.
## Example of MockMvc test
```java
@RunWith(RestPactRunner.class) // Custom pact runner, child of PactRunner which runs only REST tests
@Provider("myAwesomeService") // Set up name of tested provider
@PactFolder("pacts") // Point where to find pacts (See also section Pacts source in documentation)
public class ContractTest {
//Create an instance of your controller. We cannot autowire this as we're not using (and don't want to use) a Spring test runner.
@InjectMocks
private AwesomeController awesomeController = new AwesomeController();
//Mock your service logic class. We'll use this to create scenarios for respective provider states.
@Mock
private AwesomeBusinessLogic awesomeBusinessLogic;
//Create an instance of your controller advice (if you have one). This will be passed to the MockMvcTarget constructor to be wired up with MockMvc.
@InjectMocks
private AwesomeControllerAdvice awesomeControllerAdvice = new AwesomeControllerAdvice();
//Create a new instance of the MockMvcTarget and annotate it as the TestTarget for PactRunner
@TestTarget
public final MockMvcTarget target = new MockMvcTarget();
@Before //Method will be run before each test of interaction
public void before() {
//initialize your mocks using your mocking framework
MockitoAnnotations.initMocks(this);
//configure the MockMvcTarget with your controller and controller advice
target.setControllers(awesomeController);
target.setControllerAdvice(awesomeControllerAdvice);
}
@State("default", "no-data") // Method will be run before testing interactions that require "default" or "no-data" state
public void toDefaultState() {
target.setRunTimes(3); //let's loop through this state a few times for a 3 data variants
when(awesomeBusinessLogic.getById(any(UUID.class)))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.ONE))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.TWO))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.THREE));
}
@State("error-case")
public void SingleUploadExistsState_Success() {
target.setRunTimes(1); //tell the runner to only loop one time for this state
//you might want to throw exceptions to be picked off by your controller advice
when(awesomeBusinessLogic.getById(any(UUID.class)))
.then(i -> { throw new NotCoolException(i.getArgumentAt(0, UUID.class).toString()); });
}
}
```
## Using a Spring runner (version 3.5.7+)
You can use `SpringRestPactRunner` instead of the default Pact runner to use the Spring test annotations. This will
allow you to inject or mock spring beans.
For example:
```java
@RunWith(SpringRestPactRunner.class)
@Provider("pricing")
@PactBroker(protocol = "https", host = "${pactBrokerHost}", port = "443",
authentication = @PactBrokerAuth(username = "${pactBrokerUser}", password = "${pactBrokerPassword}"))
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.DEFINED_PORT)
public class PricingServiceProviderPactTest {
@MockBean
private ProductClient productClient; // This will replace the bean with a mock in the application context
@TestTarget
@SuppressWarnings(value = "VisibilityModifier")
public final Target target = new HttpTarget(8091);
@State("Product X010000021 exists")
public void setupProductX010000021() throws IOException {
reset(productClient);
ProductBuilder product = new ProductBuilder()
.withProductCode("X010000021");
when(productClient.fetch((Set<String>) argThat(contains("X010000021")), any())).thenReturn(product);
}
@State("the product code X00001 can be priced")
public void theProductCodeX00001CanBePriced() throws IOException {
reset(productClient);
ProductBuilder product = new ProductBuilder()
.withProductCode("X00001");
when(productClient.find((Set<String>) argThat(contains("X00001")), any())).thenReturn(product);
}
}
```
### Using Spring Context Properties (version 3.5.14+)
From version 3.5.14 onwards, the SpringRestPactRunner will look up any annotation expressions (like `${pactBrokerHost}`)
above) from the Spring context. For Springboot, this will allow you to define the properties in the application test properties.
For instance, if you create the following `application.yml` in the test resources:
```yaml
pactbroker:
host: "your.broker.local"
port: "443"
protocol: "https"
auth:
username: "<your broker username>"
password: "<your broker password>"
```
Then you can use the defaults on the `@PactBroker` annotation.
```java
@RunWith(SpringRestPactRunner.class)
@Provider("My Service")
@PactBroker(
authentication = @PactBrokerAuth(username = "${pactbroker.auth.username}", password = "${pactbroker.auth.password}")
)
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
```
### Using a random port with a Springboot test (version 3.5.14+)
If you use a random port in a springboot test (by setting `SpringBootTest.WebEnvironment.RANDOM_PORT`), you can use the
`SpringBootHttpTarget` which will get the application port from the spring application context.
For example:
```java
@RunWith(SpringRestPactRunner.class)
@Provider("My Service")
@PactBroker
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
@TestTarget
public final Target target = new SpringBootHttpTarget();
}
```
Group: au.com.dius Artifact: pact-jvm-provider-spring_2.12
Show all versions Show documentation Show source
Show all versions Show documentation Show source
1 downloads
Artifact pact-jvm-provider-spring_2.12
Group au.com.dius
Version 3.6.15
Last update 29. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 5
Dependencies pact-jvm-provider-junit_2.12, spring-boot-starter-test, spring-webmvc, javax.servlet-api, jackson-datatype-joda,
There are maybe transitive dependencies!
Group au.com.dius
Version 3.6.15
Last update 29. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 5
Dependencies pact-jvm-provider-junit_2.12, spring-boot-starter-test, spring-webmvc, javax.servlet-api, jackson-datatype-joda,
There are maybe transitive dependencies!
pact-jvm-provider-junit5_2.12 from group au.com.dius (version 3.6.15)
# Pact Junit 5 Extension
## Overview
For writing Pact verification tests with JUnit 5, there is an JUnit 5 Invocation Context Provider that you can use with
the `@TestTemplate` annotation. This will generate a test for each interaction found for the pact files for the provider.
To use it, add the `@Provider` and one of the pact source annotations to your test class (as per a JUnit 4 test), then
add a method annotated with `@TestTemplate` and `@ExtendWith(PactVerificationInvocationContextProvider.class)` that
takes a `PactVerificationContext` parameter. You will need to call `verifyInteraction()` on the context parameter in
your test template method.
For example:
```java
@Provider("myAwesomeService")
@PactFolder("pacts")
public class ContractVerificationTest {
@TestTemplate
@ExtendWith(PactVerificationInvocationContextProvider.class)
void pactVerificationTestTemplate(PactVerificationContext context) {
context.verifyInteraction();
}
}
```
For details on the provider and pact source annotations, refer to the [Pact junit runner](../pact-jvm-provider-junit/README.md) docs.
## Test target
You can set the test target (the object that defines the target of the test, which should point to your provider) on the
`PactVerificationContext`, but you need to do this in a before test method (annotated with `@BeforeEach`). There are three
different test targets you can use: `HttpTestTarget`, `HttpsTestTarget` and `AmpqTestTarget`.
For example:
```java
@BeforeEach
void before(PactVerificationContext context) {
context.setTarget(HttpTestTarget.fromUrl(new URL(myProviderUrl)));
// or something like
// context.setTarget(new HttpTestTarget("localhost", myProviderPort, "/"));
}
```
**Note for Maven users:** If you use Maven to run your tests, you will have to make sure that the Maven Surefire plugin is at least
version 2.22.1 uses an isolated classpath.
For example, configure it by adding the following to your POM:
```xml
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<version>2.22.1</version>
<configuration>
<useSystemClassLoader>false</useSystemClassLoader>
</configuration>
</plugin>
```
## Provider State Methods
Provider State Methods work in the same way as with JUnit 4 tests, refer to the [Pact junit runner](../pact-jvm-provider-junit/README.md) docs.
### Using multiple classes for the state change methods
If you have a large number of state change methods, you can split things up by moving them to other classes. You will
need to specify the additional classes on the test context in a `Before` method. Do this with the `withStateHandler`
or `setStateHandlers` methods. See [StateAnnotationsOnAdditionalClassTest](pact-jvm-provider-junit5/src/test/java/au/com/dius/pact/provider/junit5/StateAnnotationsOnAdditionalClassTest.java) for an example.
## Modifying the requests before they are sent
**Important Note:** You should only use this feature for things that can not be persisted in the pact file. By modifying the request, you are potentially modifying the contract from the consumer tests!
Sometimes you may need to add things to the requests that can't be persisted in a pact file. Examples of these would be authentication tokens, which have a small life span. The Http and Https test targets support injecting the request that will executed into the test template method.
You can then add things to the request before calling the `verifyInteraction()` method.
For example to add a header:
```java
@TestTemplate
@ExtendWith(PactVerificationInvocationContextProvider.class)
void testTemplate(PactVerificationContext context, HttpRequest request) {
// This will add a header to the request
request.addHeader("X-Auth-Token", "1234");
context.verifyInteraction();
}
```
## Objects that can be injected into the test methods
You can inject the following objects into your test methods (just like the `PactVerificationContext`). They will be null if injected before the
supported phase.
| Object | Can be injected from phase | Description |
| ------ | --------------- | ----------- |
| PactVerificationContext | @BeforeEach | The context to use to execute the interaction test |
| Pact | any | The Pact model for the test |
| Interaction | any | The Interaction model for the test |
| HttpRequest | @TestTemplate | The request that is going to be executed (only for HTTP and HTTPS targets) |
| ProviderVerifier | @TestTemplate | The verifier instance that is used to verify the interaction |
Group: au.com.dius Artifact: pact-jvm-provider-junit5_2.12
Show all versions Show documentation Show source
Show all versions Show documentation Show source
4 downloads
Artifact pact-jvm-provider-junit5_2.12
Group au.com.dius
Version 3.6.15
Last update 29. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 3
Dependencies pact-jvm-support, pact-jvm-provider_2.12, junit-jupiter-api,
There are maybe transitive dependencies!
Group au.com.dius
Version 3.6.15
Last update 29. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 3
Dependencies pact-jvm-support, pact-jvm-provider_2.12, junit-jupiter-api,
There are maybe transitive dependencies!
pact-jvm-consumer-junit5_2.12 from group au.com.dius (version 3.6.15)
pact-jvm-consumer-junit5
========================
JUnit 5 support for Pact consumer tests
## Dependency
The library is available on maven central using:
* group-id = `au.com.dius`
* artifact-id = `pact-jvm-consumer-junit5_2.12`
* version-id = `3.6.x`
## Usage
### 1. Add the Pact consumer test extension to the test class.
To write Pact consumer tests with JUnit 5, you need to add `@ExtendWith(PactConsumerTestExt)` to your test class. This
replaces the `PactRunner` used for JUnit 4 tests. The rest of the test follows a similar pattern as for JUnit 4 tests.
```java
@ExtendWith(PactConsumerTestExt.class)
class ExampleJavaConsumerPactTest {
```
### 2. create a method annotated with `@Pact` that returns the interactions for the test
For each test (as with JUnit 4), you need to define a method annotated with the `@Pact` annotation that returns the
interactions for the test.
```java
@Pact(provider="ArticlesProvider", consumer="test_consumer")
public RequestResponsePact createPact(PactDslWithProvider builder) {
return builder
.given("test state")
.uponReceiving("ExampleJavaConsumerPactTest test interaction")
.path("/articles.json")
.method("GET")
.willRespondWith()
.status(200)
.body("{\"responsetest\": true}")
.toPact();
}
```
### 3. Link the mock server with the interactions for the test with `@PactTestFor`
Then the final step is to use the `@PactTestFor` annotation to tell the Pact extension how to setup the Pact test. You
can either put this annotation on the test class, or on the test method. For examples see
[ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) and
[MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy).
The `@PactTestFor` annotation allows you to control the mock server in the same way as the JUnit 4 `PactProviderRule`. It
allows you to set the hostname to bind to (default is `localhost`) and the port (default is to use a random port). You
can also set the Pact specification version to use (default is V3).
```java
@ExtendWith(PactConsumerTestExt.class)
@PactTestFor(providerName = "ArticlesProvider")
public class ExampleJavaConsumerPactTest {
```
**NOTE on the hostname**: The mock server runs in the same JVM as the test, so the only valid values for hostname are:
| hostname | result |
| -------- | ------ |
| `localhost` | binds to the address that localhost points to (normally the loopback adapter) |
| `127.0.0.1` or `::1` | binds to the loopback adapter |
| host name | binds to the default interface that the host machines DNS name resolves to |
| `0.0.0.0` or `::` | binds to the all interfaces on the host machine |
#### Matching the interactions by provider name
If you set the `providerName` on the `@PactTestFor` annotation, then the first method with a `@Pact` annotation with the
same provider name will be used. See [ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) for
an example.
#### Matching the interactions by method name
If you set the `pactMethod` on the `@PactTestFor` annotation, then the method with the provided name will be used (it still
needs a `@Pact` annotation). See [MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy) for an example.
### Injecting the mock server into the test
You can get the mock server injected into the test method by adding a `MockServer` parameter to the test method.
```java
@Test
void test(MockServer mockServer) throws IOException {
HttpResponse httpResponse = Request.Get(mockServer.getUrl() + "/articles.json").execute().returnResponse();
assertThat(httpResponse.getStatusLine().getStatusCode(), is(equalTo(200)));
}
```
This helps with getting the base URL of the mock server, especially when a random port is used.
## Changing the directory pact files are written to
By default, pact files are written to `target/pacts` (or `build/pacts` if you use Gradle), but this can be overwritten with the `pact.rootDir` system property.
This property needs to be set on the test JVM as most build tools will fork a new JVM to run the tests.
For Gradle, add this to your build.gradle:
```groovy
test {
systemProperties['pact.rootDir'] = "$buildDir/custom-pacts-directory"
}
```
For maven, use the systemPropertyVariables configuration:
```xml
<project>
[...]
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<version>2.18</version>
<configuration>
<systemPropertyVariables>
<pact.rootDir>some/other/directory</pact.rootDir>
<buildDirectory>${project.build.directory}</buildDirectory>
[...]
</systemPropertyVariables>
</configuration>
</plugin>
</plugins>
</build>
[...]
</project>
```
For SBT:
```scala
fork in Test := true,
javaOptions in Test := Seq("-Dpact.rootDir=some/other/directory")
```
### Using `@PactFolder` annotation [3.6.2+]
You can override the directory the pacts are written in a test by adding the `@PactFolder` annotation to the test
class.
## Forcing pact files to be overwritten (3.6.5+)
By default, when the pact file is written, it will be merged with any existing pact file. To force the file to be
overwritten, set the Java system property `pact.writer.overwrite` to `true`.
## Unsupported
The current implementation does not support tests with multiple providers. This will be added in a later release.
# Having values injected from provider state callbacks (3.6.11+)
You can have values from the provider state callbacks be injected into most places (paths, query parameters, headers,
bodies, etc.). This works by using the V3 spec generators with provider state callbacks that return values. One example
of where this would be useful is API calls that require an ID which would be auto-generated by the database on the
provider side, so there is no way to know what the ID would be beforehand.
The following DSL methods all you to set an expression that will be parsed with the values returned from the provider states:
For JSON bodies, use `valueFromProviderState`.<br/>
For headers, use `headerFromProviderState`.<br/>
For query parameters, use `queryParameterFromProviderState`.<br/>
For paths, use `pathFromProviderState`.
For example, assume that an API call is made to get the details of a user by ID. A provider state can be defined that
specifies that the user must be exist, but the ID will be created when the user is created. So we can then define an
expression for the path where the ID will be replaced with the value returned from the provider state callback.
```java
.pathFromProviderState("/api/users/${id}", "/api/users/100")
```
You can also just use the key instead of an expression:
```java
.valueFromProviderState('userId', 'userId', 100) // will look value using userId as the key
```
Group: au.com.dius Artifact: pact-jvm-consumer-junit5_2.12
Show all versions Show documentation Show source
Show all versions Show documentation Show source
3 downloads
Artifact pact-jvm-consumer-junit5_2.12
Group au.com.dius
Version 3.6.15
Last update 29. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 2
Dependencies pact-jvm-consumer_2.12, junit-jupiter-api,
There are maybe transitive dependencies!
Group au.com.dius
Version 3.6.15
Last update 29. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 2
Dependencies pact-jvm-consumer_2.12, junit-jupiter-api,
There are maybe transitive dependencies!
pact-jvm-provider-junit5 from group au.com.dius (version 4.0.10)
# Pact Junit 5 Extension
## Overview
For writing Pact verification tests with JUnit 5, there is an JUnit 5 Invocation Context Provider that you can use with
the `@TestTemplate` annotation. This will generate a test for each interaction found for the pact files for the provider.
To use it, add the `@Provider` and one of the pact source annotations to your test class (as per a JUnit 4 test), then
add a method annotated with `@TestTemplate` and `@ExtendWith(PactVerificationInvocationContextProvider.class)` that
takes a `PactVerificationContext` parameter. You will need to call `verifyInteraction()` on the context parameter in
your test template method.
For example:
```java
@Provider("myAwesomeService")
@PactFolder("pacts")
public class ContractVerificationTest {
@TestTemplate
@ExtendWith(PactVerificationInvocationContextProvider.class)
void pactVerificationTestTemplate(PactVerificationContext context) {
context.verifyInteraction();
}
}
```
For details on the provider and pact source annotations, refer to the [Pact junit runner](../pact-jvm-provider-junit/README.md) docs.
## Test target
You can set the test target (the object that defines the target of the test, which should point to your provider) on the
`PactVerificationContext`, but you need to do this in a before test method (annotated with `@BeforeEach`). There are three
different test targets you can use: `HttpTestTarget`, `HttpsTestTarget` and `AmpqTestTarget`.
For example:
```java
@BeforeEach
void before(PactVerificationContext context) {
context.setTarget(HttpTestTarget.fromUrl(new URL(myProviderUrl)));
// or something like
// context.setTarget(new HttpTestTarget("localhost", myProviderPort, "/"));
}
```
**Note for Maven users:** If you use Maven to run your tests, you will have to make sure that the Maven Surefire plugin is at least
version 2.22.1 uses an isolated classpath.
For example, configure it by adding the following to your POM:
```xml
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<version>2.22.1</version>
<configuration>
<useSystemClassLoader>false</useSystemClassLoader>
</configuration>
</plugin>
```
## Provider State Methods
Provider State Methods work in the same way as with JUnit 4 tests, refer to the [Pact junit runner](../pact-jvm-provider-junit/README.md) docs.
### Using multiple classes for the state change methods
If you have a large number of state change methods, you can split things up by moving them to other classes. You will
need to specify the additional classes on the test context in a `Before` method. Do this with the `withStateHandler`
or `setStateHandlers` methods. See [StateAnnotationsOnAdditionalClassTest](src/test/java/au/com/dius/pact/provider/junit5/StateAnnotationsOnAdditionalClassTest.java) for an example.
## Modifying the requests before they are sent
**Important Note:** You should only use this feature for things that can not be persisted in the pact file. By modifying
the request, you are potentially modifying the contract from the consumer tests!
Sometimes you may need to add things to the requests that can't be persisted in a pact file. Examples of these would be
authentication tokens, which have a small life span. The Http and Https test targets support injecting the request that
will executed into the test template method.
You can then add things to the request before calling the `verifyInteraction()` method.
For example to add a header:
```java
@TestTemplate
@ExtendWith(PactVerificationInvocationContextProvider.class)
void testTemplate(PactVerificationContext context, HttpRequest request) {
// This will add a header to the request
request.addHeader("X-Auth-Token", "1234");
context.verifyInteraction();
}
```
## Objects that can be injected into the test methods
You can inject the following objects into your test methods (just like the `PactVerificationContext`). They will be null if injected before the
supported phase.
| Object | Can be injected from phase | Description |
| ------ | --------------- | ----------- |
| PactVerificationContext | @BeforeEach | The context to use to execute the interaction test |
| Pact | any | The Pact model for the test |
| Interaction | any | The Interaction model for the test |
| HttpRequest | @TestTemplate | The request that is going to be executed (only for HTTP and HTTPS targets) |
| ProviderVerifier | @TestTemplate | The verifier instance that is used to verify the interaction |
## Allowing the test to pass when no pacts are found to verify (version 4.0.7+)
By default, the test will fail with an exception if no pacts were found to verify. This can be overridden by adding the
`@IgnoreNoPactsToVerify` annotation to the test class. For this to work, you test class will need to be able to receive
null values for any of the injected parameters.
Group: au.com.dius Artifact: pact-jvm-provider-junit5
Show all versions Show documentation Show source
Show all versions Show documentation Show source
0 downloads
Artifact pact-jvm-provider-junit5
Group au.com.dius
Version 4.0.10
Last update 18. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 3
Dependencies junit-jupiter-api, pact-jvm-core-support, pact-jvm-provider,
There are maybe transitive dependencies!
Group au.com.dius
Version 4.0.10
Last update 18. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 3
Dependencies junit-jupiter-api, pact-jvm-core-support, pact-jvm-provider,
There are maybe transitive dependencies!
pact-jvm-consumer-junit5 from group au.com.dius (version 4.0.10)
pact-jvm-consumer-junit5
========================
JUnit 5 support for Pact consumer tests
## Dependency
The library is available on maven central using:
* group-id = `au.com.dius`
* artifact-id = `pact-jvm-consumer-junit5`
* version-id = `4.0.x`
## Usage
### 1. Add the Pact consumer test extension to the test class.
To write Pact consumer tests with JUnit 5, you need to add `@ExtendWith(PactConsumerTestExt)` to your test class. This
replaces the `PactRunner` used for JUnit 4 tests. The rest of the test follows a similar pattern as for JUnit 4 tests.
```java
@ExtendWith(PactConsumerTestExt.class)
class ExampleJavaConsumerPactTest {
```
### 2. create a method annotated with `@Pact` that returns the interactions for the test
For each test (as with JUnit 4), you need to define a method annotated with the `@Pact` annotation that returns the
interactions for the test.
```java
@Pact(provider="ArticlesProvider", consumer="test_consumer")
public RequestResponsePact createPact(PactDslWithProvider builder) {
return builder
.given("test state")
.uponReceiving("ExampleJavaConsumerPactTest test interaction")
.path("/articles.json")
.method("GET")
.willRespondWith()
.status(200)
.body("{\"responsetest\": true}")
.toPact();
}
```
### 3. Link the mock server with the interactions for the test with `@PactTestFor`
Then the final step is to use the `@PactTestFor` annotation to tell the Pact extension how to setup the Pact test. You
can either put this annotation on the test class, or on the test method. For examples see
[ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) and
[MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy).
The `@PactTestFor` annotation allows you to control the mock server in the same way as the JUnit 4 `PactProviderRule`. It
allows you to set the hostname to bind to (default is `localhost`) and the port (default is to use a random port). You
can also set the Pact specification version to use (default is V3).
```java
@ExtendWith(PactConsumerTestExt.class)
@PactTestFor(providerName = "ArticlesProvider")
public class ExampleJavaConsumerPactTest {
```
**NOTE on the hostname**: The mock server runs in the same JVM as the test, so the only valid values for hostname are:
| hostname | result |
| -------- | ------ |
| `localhost` | binds to the address that localhost points to (normally the loopback adapter) |
| `127.0.0.1` or `::1` | binds to the loopback adapter |
| host name | binds to the default interface that the host machines DNS name resolves to |
| `0.0.0.0` or `::` | binds to the all interfaces on the host machine |
#### Matching the interactions by provider name
If you set the `providerName` on the `@PactTestFor` annotation, then the first method with a `@Pact` annotation with the
same provider name will be used. See [ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) for
an example.
#### Matching the interactions by method name
If you set the `pactMethod` on the `@PactTestFor` annotation, then the method with the provided name will be used (it still
needs a `@Pact` annotation). See [MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy) for an example.
### Injecting the mock server into the test
You can get the mock server injected into the test method by adding a `MockServer` parameter to the test method.
```java
@Test
void test(MockServer mockServer) throws IOException {
HttpResponse httpResponse = Request.Get(mockServer.getUrl() + "/articles.json").execute().returnResponse();
assertThat(httpResponse.getStatusLine().getStatusCode(), is(equalTo(200)));
}
```
This helps with getting the base URL of the mock server, especially when a random port is used.
## Changing the directory pact files are written to
By default, pact files are written to `target/pacts` (or `build/pacts` if you use Gradle), but this can be overwritten with the `pact.rootDir` system property.
This property needs to be set on the test JVM as most build tools will fork a new JVM to run the tests.
For Gradle, add this to your build.gradle:
```groovy
test {
systemProperties['pact.rootDir'] = "$buildDir/custom-pacts-directory"
}
```
For maven, use the systemPropertyVariables configuration:
```xml
<project>
[...]
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<version>2.18</version>
<configuration>
<systemPropertyVariables>
<pact.rootDir>some/other/directory</pact.rootDir>
<buildDirectory>${project.build.directory}</buildDirectory>
[...]
</systemPropertyVariables>
</configuration>
</plugin>
</plugins>
</build>
[...]
</project>
```
For SBT:
```scala
fork in Test := true,
javaOptions in Test := Seq("-Dpact.rootDir=some/other/directory")
```
### Using `@PactFolder` annotation
You can override the directory the pacts are written in a test by adding the `@PactFolder` annotation to the test
class.
## Forcing pact files to be overwritten (3.6.5+)
By default, when the pact file is written, it will be merged with any existing pact file. To force the file to be
overwritten, set the Java system property `pact.writer.overwrite` to `true`.
## Unsupported
The current implementation does not support tests with multiple providers. This will be added in a later release.
# Having values injected from provider state callbacks (3.6.11+)
You can have values from the provider state callbacks be injected into most places (paths, query parameters, headers,
bodies, etc.). This works by using the V3 spec generators with provider state callbacks that return values. One example
of where this would be useful is API calls that require an ID which would be auto-generated by the database on the
provider side, so there is no way to know what the ID would be beforehand.
The following DSL methods all you to set an expression that will be parsed with the values returned from the provider states:
For JSON bodies, use `valueFromProviderState`.<br/>
For headers, use `headerFromProviderState`.<br/>
For query parameters, use `queryParameterFromProviderState`.<br/>
For paths, use `pathFromProviderState`.
For example, assume that an API call is made to get the details of a user by ID. A provider state can be defined that
specifies that the user must be exist, but the ID will be created when the user is created. So we can then define an
expression for the path where the ID will be replaced with the value returned from the provider state callback.
```java
.pathFromProviderState("/api/users/${id}", "/api/users/100")
```
You can also just use the key instead of an expression:
```java
.valueFromProviderState('userId', 'userId', 100) // will look value using userId as the key
```
Group: au.com.dius Artifact: pact-jvm-consumer-junit5
Show all versions Show documentation Show source
Show all versions Show documentation Show source
0 downloads
Artifact pact-jvm-consumer-junit5
Group au.com.dius
Version 4.0.10
Last update 18. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 2
Dependencies junit-jupiter-api, pact-jvm-consumer,
There are maybe transitive dependencies!
Group au.com.dius
Version 4.0.10
Last update 18. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 2
Dependencies junit-jupiter-api, pact-jvm-consumer,
There are maybe transitive dependencies!
pact-jvm-provider-spring_2.11 from group au.com.dius (version 3.5.24)
# Pact Spring/JUnit runner
## Overview
Library provides ability to play contract tests against a provider using Spring & JUnit.
This library is based on and references the JUnit package, so see [junit provider support](pact-jvm-provider-junit) for more details regarding configuration using JUnit.
Supports:
- Standard ways to load pacts from folders and broker
- Easy way to change assertion strategy
- Spring Test MockMVC Controllers and ControllerAdvice using MockMvc standalone setup.
- MockMvc debugger output
- Multiple @State runs to test a particular Provider State multiple times
- **au.com.dius.pact.provider.junit.State** custom annotation - before each interaction that requires a state change,
all methods annotated by `@State` with appropriate the state listed will be invoked.
**NOTE:** For publishing provider verification results to a pact broker, make sure the Java system property `pact.provider.version`
is set with the version of your provider.
## Example of MockMvc test
```java
@RunWith(RestPactRunner.class) // Custom pact runner, child of PactRunner which runs only REST tests
@Provider("myAwesomeService") // Set up name of tested provider
@PactFolder("pacts") // Point where to find pacts (See also section Pacts source in documentation)
public class ContractTest {
//Create an instance of your controller. We cannot autowire this as we're not using (and don't want to use) a Spring test runner.
@InjectMocks
private AwesomeController awesomeController = new AwesomeController();
//Mock your service logic class. We'll use this to create scenarios for respective provider states.
@Mock
private AwesomeBusinessLogic awesomeBusinessLogic;
//Create an instance of your controller advice (if you have one). This will be passed to the MockMvcTarget constructor to be wired up with MockMvc.
@InjectMocks
private AwesomeControllerAdvice awesomeControllerAdvice = new AwesomeControllerAdvice();
//Create a new instance of the MockMvcTarget and annotate it as the TestTarget for PactRunner
@TestTarget
public final MockMvcTarget target = new MockMvcTarget();
@Before //Method will be run before each test of interaction
public void before() {
//initialize your mocks using your mocking framework
MockitoAnnotations.initMocks(this);
//configure the MockMvcTarget with your controller and controller advice
target.setControllers(awesomeController);
target.setControllerAdvice(awesomeControllerAdvice);
}
@State("default", "no-data") // Method will be run before testing interactions that require "default" or "no-data" state
public void toDefaultState() {
target.setRunTimes(3); //let's loop through this state a few times for a 3 data variants
when(awesomeBusinessLogic.getById(any(UUID.class)))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.ONE))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.TWO))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.THREE));
}
@State("error-case")
public void SingleUploadExistsState_Success() {
target.setRunTimes(1); //tell the runner to only loop one time for this state
//you might want to throw exceptions to be picked off by your controller advice
when(awesomeBusinessLogic.getById(any(UUID.class)))
.then(i -> { throw new NotCoolException(i.getArgumentAt(0, UUID.class).toString()); });
}
}
```
## Using a Spring runner (version 3.5.7+)
You can use `SpringRestPactRunner` instead of the default Pact runner to use the Spring test annotations. This will
allow you to inject or mock spring beans.
For example:
```java
@RunWith(SpringRestPactRunner.class)
@Provider("pricing")
@PactBroker(protocol = "https", host = "${pactBrokerHost}", port = "443",
authentication = @PactBrokerAuth(username = "${pactBrokerUser}", password = "${pactBrokerPassword}"))
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.DEFINED_PORT)
public class PricingServiceProviderPactTest {
@MockBean
private ProductClient productClient; // This will replace the bean with a mock in the application context
@TestTarget
@SuppressWarnings(value = "VisibilityModifier")
public final Target target = new HttpTarget(8091);
@State("Product X010000021 exists")
public void setupProductX010000021() throws IOException {
reset(productClient);
ProductBuilder product = new ProductBuilder()
.withProductCode("X010000021");
when(productClient.fetch((Set<String>) argThat(contains("X010000021")), any())).thenReturn(product);
}
@State("the product code X00001 can be priced")
public void theProductCodeX00001CanBePriced() throws IOException {
reset(productClient);
ProductBuilder product = new ProductBuilder()
.withProductCode("X00001");
when(productClient.find((Set<String>) argThat(contains("X00001")), any())).thenReturn(product);
}
}
```
### Using Spring Context Properties (version 3.5.14+)
From version 3.5.14 onwards, the SpringRestPactRunner will look up any annotation expressions (like `${pactBrokerHost}`)
above) from the Spring context. For Springboot, this will allow you to define the properties in the application test properties.
For instance, if you create the following `application.yml` in the test resources:
```yaml
pactbroker:
host: "your.broker.local"
port: "443"
protocol: "https"
auth:
username: "<your broker username>"
password: "<your broker password>"
```
Then you can use the defaults on the `@PactBroker` annotation.
```java
@RunWith(SpringRestPactRunner.class)
@Provider("My Service")
@PactBroker(
authentication = @PactBrokerAuth(username = "${pactbroker.auth.username}", password = "${pactbroker.auth.password}")
)
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
```
### Using a random port with a Springboot test (version 3.5.14+)
If you use a random port in a springboot test (by setting `SpringBootTest.WebEnvironment.RANDOM_PORT`), you can use the
`SpringBootHttpTarget` which will get the application port from the spring application context.
For example:
```java
@RunWith(SpringRestPactRunner.class)
@Provider("My Service")
@PactBroker
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
@TestTarget
public final Target target = new SpringBootHttpTarget();
}
```
Group: au.com.dius Artifact: pact-jvm-provider-spring_2.11
Show all versions Show documentation Show source
Show all versions Show documentation Show source
2 downloads
Artifact pact-jvm-provider-spring_2.11
Group au.com.dius
Version 3.5.24
Last update 04. November 2018
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 13
Dependencies kotlin-stdlib-jdk8, kotlin-reflect, slf4j-api, groovy-all, kotlin-logging, scala-library, scala-logging_2.11, pact-jvm-provider-junit_2.11, spring-boot-starter-test, spring-web, spring-webmvc, javax.servlet-api, jackson-datatype-joda,
There are maybe transitive dependencies!
Group au.com.dius
Version 3.5.24
Last update 04. November 2018
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 13
Dependencies kotlin-stdlib-jdk8, kotlin-reflect, slf4j-api, groovy-all, kotlin-logging, scala-library, scala-logging_2.11, pact-jvm-provider-junit_2.11, spring-boot-starter-test, spring-web, spring-webmvc, javax.servlet-api, jackson-datatype-joda,
There are maybe transitive dependencies!
pact-jvm-provider-spring from group au.com.dius (version 4.0.10)
# Pact Spring/JUnit runner
## Overview
Library provides ability to play contract tests against a provider using Spring & JUnit.
This library is based on and references the JUnit package, so see the [Pact JUnit 4](../pact-jvm-provider-junit) or [Pact JUnit 5](../pact-jvm-provider-junit5) providers for more details regarding configuration using JUnit.
Supports:
- Standard ways to load pacts from folders and broker
- Easy way to change assertion strategy
- Spring Test MockMVC Controllers and ControllerAdvice using MockMvc standalone setup.
- MockMvc debugger output
- Multiple @State runs to test a particular Provider State multiple times
- **au.com.dius.pact.provider.junit.State** custom annotation - before each interaction that requires a state change,
all methods annotated by `@State` with appropriate the state listed will be invoked.
**NOTE:** For publishing provider verification results to a pact broker, make sure the Java system property `pact.provider.version`
is set with the version of your provider.
## Example of MockMvc test
```java
@RunWith(RestPactRunner.class) // Custom pact runner, child of PactRunner which runs only REST tests
@Provider("myAwesomeService") // Set up name of tested provider
@PactFolder("pacts") // Point where to find pacts (See also section Pacts source in documentation)
public class ContractTest {
//Create an instance of your controller. We cannot autowire this as we're not using (and don't want to use) a Spring test runner.
@InjectMocks
private AwesomeController awesomeController = new AwesomeController();
//Mock your service logic class. We'll use this to create scenarios for respective provider states.
@Mock
private AwesomeBusinessLogic awesomeBusinessLogic;
//Create an instance of your controller advice (if you have one). This will be passed to the MockMvcTarget constructor to be wired up with MockMvc.
@InjectMocks
private AwesomeControllerAdvice awesomeControllerAdvice = new AwesomeControllerAdvice();
//Create a new instance of the MockMvcTarget and annotate it as the TestTarget for PactRunner
@TestTarget
public final MockMvcTarget target = new MockMvcTarget();
@Before //Method will be run before each test of interaction
public void before() {
//initialize your mocks using your mocking framework
MockitoAnnotations.initMocks(this);
//configure the MockMvcTarget with your controller and controller advice
target.setControllers(awesomeController);
target.setControllerAdvice(awesomeControllerAdvice);
}
@State("default", "no-data") // Method will be run before testing interactions that require "default" or "no-data" state
public void toDefaultState() {
target.setRunTimes(3); //let's loop through this state a few times for a 3 data variants
when(awesomeBusinessLogic.getById(any(UUID.class)))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.ONE))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.TWO))
.thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.THREE));
}
@State("error-case")
public void SingleUploadExistsState_Success() {
target.setRunTimes(1); //tell the runner to only loop one time for this state
//you might want to throw exceptions to be picked off by your controller advice
when(awesomeBusinessLogic.getById(any(UUID.class)))
.then(i -> { throw new NotCoolException(i.getArgumentAt(0, UUID.class).toString()); });
}
}
```
## Using Spring runners
You can use `SpringRestPactRunner` or `SpringMessagePactRunner` instead of the default Pact runner to use the Spring test annotations. This will
allow you to inject or mock spring beans. `SpringRestPactRunner` is for restful webapps and `SpringMessagePactRunner` is
for async message tests.
For example:
```java
@RunWith(SpringRestPactRunner.class)
@Provider("pricing")
@PactBroker(protocol = "https", host = "${pactBrokerHost}", port = "443",
authentication = @PactBrokerAuth(username = "${pactBrokerUser}", password = "${pactBrokerPassword}"))
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.DEFINED_PORT)
public class PricingServiceProviderPactTest {
@MockBean
private ProductClient productClient; // This will replace the bean with a mock in the application context
@TestTarget
@SuppressWarnings(value = "VisibilityModifier")
public final Target target = new HttpTarget(8091);
@State("Product X010000021 exists")
public void setupProductX010000021() throws IOException {
reset(productClient);
ProductBuilder product = new ProductBuilder()
.withProductCode("X010000021");
when(productClient.fetch((Set<String>) argThat(contains("X010000021")), any())).thenReturn(product);
}
@State("the product code X00001 can be priced")
public void theProductCodeX00001CanBePriced() throws IOException {
reset(productClient);
ProductBuilder product = new ProductBuilder()
.withProductCode("X00001");
when(productClient.find((Set<String>) argThat(contains("X00001")), any())).thenReturn(product);
}
}
```
### Using Spring Context Properties
The SpringRestPactRunner will look up any annotation expressions (like `${pactBrokerHost}`)
above) from the Spring context. For Springboot, this will allow you to define the properties in the application test properties.
For instance, if you create the following `application.yml` in the test resources:
```yaml
pactbroker:
host: "your.broker.local"
port: "443"
protocol: "https"
auth:
username: "<your broker username>"
password: "<your broker password>"
```
Then you can use the defaults on the `@PactBroker` annotation.
```java
@RunWith(SpringRestPactRunner.class)
@Provider("My Service")
@PactBroker(
authentication = @PactBrokerAuth(username = "${pactbroker.auth.username}", password = "${pactbroker.auth.password}")
)
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
```
### Using a random port with a Springboot test
If you use a random port in a springboot test (by setting `SpringBootTest.WebEnvironment.RANDOM_PORT`), you need to set it to the `TestTarget`. How this works is different for JUnit4 and JUnit5.
#### JUnit4
You can use the
`SpringBootHttpTarget` which will get the application port from the spring application context.
For example:
```java
@RunWith(SpringRestPactRunner.class)
@Provider("My Service")
@PactBroker
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
@TestTarget
public final Target target = new SpringBootHttpTarget();
}
```
#### JUnit5
You actually don't need to dependend on `pact-jvm-provider-spring` for this. It's sufficient to depend on `pact-jvm-provider-junit5`.
You can set the port to the `HttpTestTarget` object in the before method.
```java
@Provider("My Service")
@PactBroker
@SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT)
public class PactVerificationTest {
@LocalServerPort
private int port;
@BeforeEach
void before(PactVerificationContext context) {
context.setTarget(new HttpTestTarget("localhost", port));
}
}
```
Group: au.com.dius Artifact: pact-jvm-provider-spring
Show all versions Show documentation Show source
Show all versions Show documentation Show source
0 downloads
Artifact pact-jvm-provider-spring
Group au.com.dius
Version 4.0.10
Last update 18. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 5
Dependencies spring-boot-starter-test, spring-webmvc, javax.servlet-api, jackson-datatype-joda, pact-jvm-provider-junit,
There are maybe transitive dependencies!
Group au.com.dius
Version 4.0.10
Last update 18. April 2020
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 5
Dependencies spring-boot-starter-test, spring-webmvc, javax.servlet-api, jackson-datatype-joda, pact-jvm-provider-junit,
There are maybe transitive dependencies!
pact-jvm-provider-maven_2.11 from group au.com.dius (version 3.5.24)
Maven plugin to verify a provider
=================================
Maven plugin for verifying pacts against a provider.
The Maven plugin provides a `verify` goal which will verify all configured pacts against your provider.
## To Use It
### 1. Add the pact-jvm-provider-maven plugin to your `build` section of your pom file.
```xml
<build>
[...]
<plugins>
[...]
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
</plugin>
[...]
</plugins>
[...]
</build>
```
### 2. Define the pacts between your consumers and providers
You define all the providers and consumers within the configuration element of the maven plugin.
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<!-- You can define as many as you need, but each must have a unique name -->
<serviceProvider>
<name>provider1</name>
<!-- All the provider properties are optional, and have sensible defaults (shown below) -->
<protocol>http</protocol>
<host>localhost</host>
<port>8080</port>
<path>/</path>
<consumers>
<!-- Again, you can define as many consumers for each provider as you need, but each must have a unique name -->
<consumer>
<name>consumer1</name>
<!-- currently supports a file path using pactFile or a URL using pactUrl -->
<pactFile>path/to/provider1-consumer1-pact.json</pactFile>
</consumer>
</consumers>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
### 3. Execute `mvn pact:verify`
You will have to have your provider running for this to pass.
## Verifying all pact files in a directory for a provider
You can specify a directory that contains pact files, and the Pact plugin will scan for all pact files that match that
provider and define a consumer for each pact file in the directory. Consumer name is read from contents of pact file.
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<!-- You can define as many as you need, but each must have a unique name -->
<serviceProvider>
<name>provider1</name>
<!-- All the provider properties are optional, and have sensible defaults (shown below) -->
<protocol>http</protocol>
<host>localhost</host>
<port>8080</port>
<path>/</path>
<pactFileDirectory>path/to/pacts</pactFileDirectory>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
### Verifying all pact files from multiple directories for a provider [3.5.18+]
If you want to specify multiple directories, you can use `pactFileDirectories`. The plugin will only fail the build if
no pact files are loaded after processing all the directories in the list.
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.18</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>provider1</name>
<pactFileDirectories>
<pactFileDirectory>path/to/pacts1</pactFileDirectory>
<pactFileDirectory>path/to/pacts2</pactFileDirectory>
</pactFileDirectories>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
## Enabling insecure SSL
For providers that are running on SSL with self-signed certificates, you need to enable insecure SSL mode by setting
`<insecure>true</insecure>` on the provider.
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>provider1</name>
<pactFileDirectory>path/to/pacts</pactFileDirectory>
<insecure>true</insecure>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
## Specifying a custom trust store
For environments that are running their own certificate chains:
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>provider1</name>
<pactFileDirectory>path/to/pacts</pactFileDirectory>
<trustStore>relative/path/to/trustStore.jks</trustStore>
<trustStorePassword>changeit</trustStorePassword>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
`trustStore` is either relative to the current working (build) directory. `trustStorePassword` defaults to `changeit`.
NOTE: The hostname will still be verified against the certificate.
## Modifying the requests before they are sent
Sometimes you may need to add things to the requests that can't be persisted in a pact file. Examples of these would
be authentication tokens, which have a small life span. The Pact Maven plugin provides a request filter that can be
set to a Groovy script on the provider that will be called before the request is made. This script will receive the HttpRequest
bound to a variable named `request` prior to it being executed.
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>provider1</name>
<requestFilter>
// This is a Groovy script that adds an Authorization header to each request
request.addHeader('Authorization', 'oauth-token eyJhbGciOiJSUzI1NiIsIm...')
</requestFilter>
<consumers>
<consumer>
<name>consumer1</name>
<pactFile>path/to/provider1-consumer1-pact.json</pactFile>
</consumer>
</consumers>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
__*Important Note:*__ You should only use this feature for things that can not be persisted in the pact file. By modifying
the request, you are potentially modifying the contract from the consumer tests!
## Modifying the HTTP Client Used
The default HTTP client is used for all requests to providers (created with a call to `HttpClients.createDefault()`).
This can be changed by specifying a closure assigned to createClient on the provider that returns a CloseableHttpClient.
For example:
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>provider1</name>
<createClient>
// This is a Groovy script that will enable the client to accept self-signed certificates
import org.apache.http.ssl.SSLContextBuilder
import org.apache.http.conn.ssl.NoopHostnameVerifier
import org.apache.http.impl.client.HttpClients
HttpClients.custom().setSSLHostnameVerifier(new NoopHostnameVerifier())
.setSslcontext(new SSLContextBuilder().loadTrustMaterial(null, { x509Certificates, s -> true })
.build())
.build()
</createClient>
<consumers>
<consumer>
<name>consumer1</name>
<pactFile>path/to/provider1-consumer1-pact.json</pactFile>
</consumer>
</consumers>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
## Turning off URL decoding of the paths in the pact file
By default the paths loaded from the pact file will be decoded before the request is sent to the provider. To turn this
behaviour off, set the system property `pact.verifier.disableUrlPathDecoding` to `true`.
__*Important Note:*__ If you turn off the url path decoding, you need to ensure that the paths in the pact files are
correctly encoded. The verifier will not be able to make a request with an invalid encoded path.
## Plugin Properties
The following plugin properties can be specified with `-Dproperty=value` on the command line or in the configuration section:
|Property|Description|
|--------|-----------|
|pact.showStacktrace|This turns on stacktrace printing for each request. It can help with diagnosing network errors|
|pact.showFullDiff|This turns on displaying the full diff of the expected versus actual bodies|
|pact.filter.consumers|Comma separated list of consumer names to verify|
|pact.filter.description|Only verify interactions whose description match the provided regular expression|
|pact.filter.providerState|Only verify interactions whose provider state match the provided regular expression. An empty string matches interactions that have no state|
|pact.verifier.publishResults|Publishing of verification results will be skipped unless this property is set to 'true' [version 3.5.18+]|
|pact.matching.wildcard|Enables matching of map values ignoring the keys when this property is set to 'true'|
Example in the configuration section:
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>provider1</name>
<consumers>
<consumer>
<name>consumer1</name>
<pactFile>path/to/provider1-consumer1-pact.json</pactFile>
</consumer>
</consumers>
</serviceProvider>
</serviceProviders>
<configuration>
<pact.showStacktrace>true</pact.showStacktrace>
</configuration>
</configuration>
</plugin>
```
## Provider States
For each provider you can specify a state change URL to use to switch the state of the provider. This URL will
receive the providerState description and parameters from the pact file before each interaction via a POST. The stateChangeUsesBody
controls if the state is passed in the request body or as query parameters.
These values can be set at the provider level, or for a specific consumer. Consumer values take precedent if both are given.
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>provider1</name>
<stateChangeUrl>http://localhost:8080/tasks/pactStateChange</stateChangeUrl>
<stateChangeUsesBody>false</stateChangeUsesBody> <!-- defaults to true -->
<consumers>
<consumer>
<name>consumer1</name>
<pactFile>path/to/provider1-consumer1-pact.json</pactFile>
<stateChangeUrl>http://localhost:8080/tasks/pactStateChangeForConsumer1</stateChangeUrl>
<stateChangeUsesBody>false</stateChangeUsesBody> <!-- defaults to true -->
</consumer>
</consumers>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
If the `stateChangeUsesBody` is not specified, or is set to true, then the provider state description and parameters will be sent as
JSON in the body of the request. If it is set to false, they will passed as query parameters.
As for normal requests (see Modifying the requests before they are sent), a state change request can be modified before
it is sent. Set `stateChangeRequestFilter` to a Groovy script on the provider that will be called before the request is made.
#### Teardown calls for state changes
You can enable teardown state change calls by setting the property `<stateChangeTeardown>true</stateChangeTeardown>` on the provider. This
will add an `action` parameter to the state change call. The setup call before the test will receive `action=setup`, and
then a teardown call will be made afterwards to the state change URL with `action=teardown`.
## Verifying pact files from a pact broker
You can setup your build to validate against the pacts stored in a pact broker. The pact plugin will query
the pact broker for all consumers that have a pact with the provider based on its name. To use it, just configure the
`pactBrokerUrl` or `pactBroker` value for the provider with the base URL to the pact broker.
For example:
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>provider1</name>
<stateChangeUrl>http://localhost:8080/tasks/pactStateChange</stateChangeUrl>
<pactBrokerUrl>http://pact-broker:5000/</pactBrokerUrl>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
### Verifying pacts from an authenticated pact broker
If your pact broker requires authentication (basic authentication is only supported), you can configure the username
and password to use by configuring the `authentication` element of the `pactBroker` element of your provider.
For example:
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>provider1</name>
<stateChangeUrl>http://localhost:8080/tasks/pactStateChange</stateChangeUrl>
<pactBroker>
<url>http://pactbroker:1234</url>
<authentication>
<username>test</username>
<password>test</password>
</authentication>
</pactBroker>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
#### Using the Maven servers configuration [version 3.5.6+]
From version 3.5.6, you can use the servers setup in the Maven settings. To do this, setup a server as per the
[Maven Server Settings](https://maven.apache.org/settings.html#Servers). Then set the server ID in the pact broker
configuration in your POM.
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.6</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>provider1</name>
<stateChangeUrl>http://localhost:8080/tasks/pactStateChange</stateChangeUrl>
<pactBroker>
<url>http://pactbroker:1234</url>
<serverId>test-pact-broker</serverId> <!-- This must match the server id in the maven settings -->
</pactBroker>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
### Verifying pacts from an pact broker that match particular tags
If your pacts in your pact broker have been tagged, you can set the tags to fetch by configuring the `tags`
element of the `pactBroker` element of your provider.
For example:
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>provider1</name>
<stateChangeUrl>http://localhost:8080/tasks/pactStateChange</stateChangeUrl>
<pactBroker>
<url>http://pactbroker:1234</url>
<tags>
<tag>TEST</tag>
<tag>DEV</tag>
</tags>
</pactBroker>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
This example will fetch and validate the pacts for the TEST and DEV tags.
## Filtering the interactions that are verified
You can filter the interactions that are run using three properties: `pact.filter.consumers`, `pact.filter.description` and `pact.filter.providerState`.
Adding `-Dpact.filter.consumers=consumer1,consumer2` to the command line or configuration section will only run the pact files for those
consumers (consumer1 and consumer2). Adding `-Dpact.filter.description=a request for payment.*` will only run those interactions
whose descriptions start with 'a request for payment'. `-Dpact.filter.providerState=.*payment` will match any interaction that
has a provider state that ends with payment, and `-Dpact.filter.providerState=` will match any interaction that does not have a
provider state.
## Not failing the build if no pact files are found [version 3.5.19+]
By default, if there are no pact files to verify, the plugin will raise an exception. This is to guard against false
positives where the build is passing but nothing has been verified due to mis-configuration.
To disable this behaviour, set the `failIfNoPactsFound` parameter to `false`.
# Verifying a message provider
The Maven plugin has been updated to allow invoking test methods that can return the message contents from a message
producer. To use it, set the way to invoke the verification to `ANNOTATED_METHOD`. This will allow the pact verification
task to scan for test methods that return the message contents.
Add something like the following to your maven pom file:
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>messageProvider</name>
<verificationType>ANNOTATED_METHOD</verificationType>
<!-- packagesToScan is optional, but leaving it out will result in the entire
test classpath being scanned. Set it to the packages where your annotated test method
can be found. -->
<packagesToScan>
<packageToScan>au.com.example.messageprovider.*</packageToScan>
</packagesToScan>
<consumers>
<consumer>
<name>consumer1</name>
<pactFile>path/to/messageprovider-consumer1-pact.json</pactFile>
</consumer>
</consumers>
</serviceProvider>
</serviceProviders>
</configuration>
</plugin>
```
Now when the pact verify task is run, will look for methods annotated with `@PactVerifyProvider` in the test classpath
that have a matching description to what is in the pact file.
```groovy
class ConfirmationKafkaMessageBuilderTest {
@PactVerifyProvider('an order confirmation message')
String verifyMessageForOrder() {
Order order = new Order()
order.setId(10000004)
order.setExchange('ASX')
order.setSecurityCode('CBA')
order.setPrice(BigDecimal.TEN)
order.setUnits(15)
order.setGst(new BigDecimal('15.0'))
odrer.setFees(BigDecimal.TEN)
def message = new ConfirmationKafkaMessageBuilder()
.withOrder(order)
.build()
JsonOutput.toJson(message)
}
}
```
It will then validate that the returned contents matches the contents for the message in the pact file.
## Changing the class path that is scanned
By default, the test classpath is scanned for annotated methods. You can override this by setting
the `classpathElements` property:
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<serviceProviders>
<serviceProvider>
<name>messageProvider</name>
<verificationType>ANNOTATED_METHOD</verificationType>
<consumers>
<consumer>
<name>consumer1</name>
<pactFile>path/to/messageprovider-consumer1-pact.json</pactFile>
</consumer>
</consumers>
</serviceProvider>
</serviceProviders>
<classpathElements>
<classpathElement>
build/classes/test
</classpathElement>
</classpathElements>
</configuration>
</plugin>
```
# Publishing pact files to a pact broker
The pact maven plugin provides a `publish` mojo that can publish all pact files in a directory
to a pact broker. To use it, you need to add a publish configuration to the POM that defines the
directory where the pact files are and the URL to the pact broker.
For example:
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<pactDirectory>path/to/pact/files</pactDirectory> <!-- Defaults to ${project.build.directory}/pacts -->
<pactBrokerUrl>http://pactbroker:1234</pactBrokerUrl>
<projectVersion>1.0.100</projectVersion> <!-- Defaults to ${project.version} -->
<trimSnapshot>true</trimSnapshot> <!-- Defaults to false -->
</configuration>
</plugin>
```
You can now execute `mvn pact:publish` to publish the pact files.
_NOTE:_ The pact broker requires a version for all published pacts. The `publish` task will use the version of the
project by default, but can be overwritten with the `projectVersion` property. Make sure you have set one otherwise the broker will reject the pact files.
_NOTE_: By default, the pact broker has issues parsing `SNAPSHOT` versions. You can configure the publisher to
automatically remove `-SNAPSHOT` from your version number by setting `trimSnapshot` to true. This setting does not modify non-snapshot versions.
You can set any tags that the pacts should be published with by setting the `tags` list property (version 3.5.12+). A common use of this
is setting the tag to the current source control branch. This supports using pact with feature branches.
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.12</version>
<configuration>
<pactDirectory>path/to/pact/files</pactDirectory> <!-- Defaults to ${project.build.directory}/pacts -->
<pactBrokerUrl>http://pactbroker:1234</pactBrokerUrl>
<projectVersion>1.0.100</projectVersion> <!-- Defaults to ${project.version} -->
<tags>
<tag>feature/feature_name</tag>
</tags>
</configuration>
</plugin>
```
## Publishing to an authenticated pact broker
For an authenticated pact broker, you can pass in the credentials with the `pactBrokerUsername` and `pactBrokerPassword`
properties. Currently it only supports basic authentication.
For example:
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.11</version>
<configuration>
<pactBrokerUrl>http://pactbroker:1234</pactBrokerUrl>
<pactBrokerUsername>USERNAME</pactBrokerUsername>
<pactBrokerPassword>PASSWORD</pactBrokerPassword>
</configuration>
</plugin>
```
#### Using the Maven servers configuration [version 3.5.6+]
From version 3.5.6, you can use the servers setup in the Maven settings. To do this, setup a server as per the
[Maven Server Settings](https://maven.apache.org/settings.html#Servers). Then set the server ID in the pact broker
configuration in your POM.
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.11</artifactId>
<version>3.5.19</version>
<configuration>
<pactBrokerUrl>http://pactbroker:1234</pactBrokerUrl>
<pactBrokerServerId>test-pact-broker</pactBrokerServerId> <!-- This must match the server id in the maven settings -->
</configuration>
</plugin>
```
## Excluding pacts from being published [version 3.5.19+]
You can exclude some of the pact files from being published by providing a list of regular expressions that match
against the base names of the pact files.
For example:
```groovy
pact {
publish {
pactBrokerUrl = 'https://mypactbroker.com'
excludes = [ '.*\\-\\d+$' ] // exclude all pact files that end with a dash followed by a number in the name
}
}
```
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.19</version>
<configuration>
<pactBrokerUrl>http://pactbroker:1234</pactBrokerUrl>
<excludes>
<exclude>.*\\-\\d+$</exclude> <!-- exclude pact files where the name ends in a dash followed by a number -->
</excludes>
</configuration>
</plugin>
```
# Publishing verification results to a Pact Broker [version 3.5.4+]
For pacts that are loaded from a Pact Broker, the results of running the verification can be published back to the
broker against the URL for the pact. You will be able to then see the result on the Pact Broker home screen.
To turn on the verification publishing, set the system property `pact.verifier.publishResults` to `true` in the pact maven plugin, not surefire, configuration.
# Enabling other verification reports [version 3.5.20+]
By default the verification report is written to the console. You can also enable a JSON or Markdown report by setting
the `reports` configuration list.
```xml
<plugin>
<groupId>au.com.dius</groupId>
<artifactId>pact-jvm-provider-maven_2.12</artifactId>
<version>3.5.20</version>
<configuration>
<reports>
<report>console</report>
<report>json</report>
<report>markdown</report>
</reports>
</configuration>
</plugin>
```
These reports will be written to `target/reports/pact`.
Group: au.com.dius Artifact: pact-jvm-provider-maven_2.11
Show all versions Show documentation Show source
Show all versions Show documentation Show source
4 downloads
Artifact pact-jvm-provider-maven_2.11
Group au.com.dius
Version 3.5.24
Last update 04. November 2018
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 12
Dependencies kotlin-stdlib-jdk8, kotlin-reflect, slf4j-api, groovy-all, kotlin-logging, scala-library, scala-logging_2.11, pact-jvm-provider_2.11, maven-plugin-api, maven-plugin-annotations, maven-core, jansi,
There are maybe transitive dependencies!
Group au.com.dius
Version 3.5.24
Last update 04. November 2018
Organization not specified
URL https://github.com/DiUS/pact-jvm
License Apache 2
Dependencies amount 12
Dependencies kotlin-stdlib-jdk8, kotlin-reflect, slf4j-api, groovy-all, kotlin-logging, scala-library, scala-logging_2.11, pact-jvm-provider_2.11, maven-plugin-api, maven-plugin-annotations, maven-core, jansi,
There are maybe transitive dependencies!
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
Page 179 from 181 (items total 1803)
© 2015 - 2025 Weber Informatics LLC | Privacy Policy