Download JAR files tagged by states with all dependencies

MassBank of America (MoNA), is an auto curating repository for storing, comparing and querying mass spectra of chemical compounds. It is metadata centric and it was designed to allow easy integration into other tools by utilize its REST based application programming interface. At the current time it contains over 200k predicted and 40k unique experimental mass spectra and their associated metadata. The predicted spectra were obtained by utilizing the lipid blast library and the experimental spectra were acquired from 30 different facilities all over the world, including several major research facilities in the United States and Japan. MoNA is utilizing the InChI Key as unique identifier for chemicals and is designed for easy scalability and expendability. This is realized by utilizing common applications like nginx, grails, AngularJS, postgresSQL and tomcat. MoNA is currently integrated in applications like MSDial, BinBase, MZMine and the statistics package R. This was accomplished by utilizing its REST based API, which is also utilized by its main AngularJS based web interface. We consider MoNA to be highly useful for crosslinking mass spectra in publications, identification of unknowns and integration in data acquisition software. This package provides you with access to the REST api of the main MoNA installation.

MassBank of America (MoNA), is an auto curating repository for storing, comparing and querying mass spectra of chemical compounds. It is metadata centric and it was designed to allow easy integration into other tools by utilize its REST based application programming interface. At the current time it contains over 200k predicted and 40k unique experimental mass spectra and their associated metadata. The predicted spectra were obtained by utilizing the lipid blast library and the experimental spectra were acquired from 30 different facilities all over the world, including several major research facilities in the United States and Japan. MoNA is utilizing the InChI Key as unique identifier for chemicals and is designed for easy scalability and expendability. This is realized by utilizing common applications like nginx, grails, AngularJS, postgresSQL and tomcat. MoNA is currently integrated in applications like MSDial, BinBase, MZMine and the statistics package R. This was accomplished by utilizing its REST based API, which is also utilized by its main AngularJS based web interface. We consider MoNA to be highly useful for crosslinking mass spectra in publications, identification of unknowns and integration in data acquisition software. This package provides you with access to the REST api of the main MoNA installation.

# pact-jvm-consumer-java8 Provides a Java8 lambda based DSL for use with Junit to build consumer tests. # A Lambda DSL for Pact This is an extension for the pact DSL provided by [pact-jvm-consumer](../pact-jvm-consumer). The difference between the default pact DSL and this lambda DSL is, as the name suggests, the usage of lambdas. The use of lambdas makes the code much cleaner. ## Why a new DSL implementation? The lambda DSL solves the following two main issues. Both are visible in the following code sample: ```java new PactDslJsonArray() .array() # open an array .stringValue("a1") # choose the method that is valid for arrays .stringValue("a2") # choose the method that is valid for arrays .closeArray() # close the array .array() # open an array .numberValue(1) # choose the method that is valid for arrays .numberValue(2) # choose the method that is valid for arrays .closeArray() # close the array .array() # open an array .object() # now we work with an object .stringValue("foo", "Foo") # choose the method that is valid for objects .closeObject() # close the object and we're back in the array .closeArray() # close the array ``` ### The existing DSL is quite error-prone Methods may only be called in certain states. For example `object()` may only be called when you're currently working on an array whereas `object(name)` is only allowed to be called when working on an object. But both of the methods are available. You'll find out at runtime if you're using the correct method. Finally, the need for opening and closing objects and arrays makes usage cumbersome. The lambda DSL has no ambiguous methods and there's no need to close objects and arrays as all the work on such an object is wrapped in a lamda call. ### The existing DSL is hard to read When formatting your source code with an IDE the code becomes hard to read as there's no indentation possible. Of course, you could do it by hand but we want auto formatting! Auto formatting works great for the new DSL! ```java array.object((o) -> { o.stringValue("foo", "Foo"); # an attribute o.stringValue("bar", "Bar"); # an attribute o.object("tar", (tarObject) -> { # an attribute with a nested object tarObject.stringValue("a", "A"); # attribute of the nested object tarObject.stringValue("b", "B"); # attribute of the nested object }) }); ``` ## Installation ### Maven ``` <dependency> <groupId>au.com.dius</groupId> <artifactId>pact-jvm-consumer-java8</artifactId> <version>${pact.version}</version> </dependency> ``` ## Usage Start with a static import of `LambdaDsl`. This class contains factory methods for the lambda dsl extension. When you come accross the `body()` method of `PactDslWithProvider` builder start using the new extensions. The call to `LambdaDsl` replaces the call to instance `new PactDslJsonArray()` and `new PactDslJsonBody()` of the pact library. ```java io.pactfoundation.consumer.dsl.LambdaDsl.* ``` ### Response body as json array ```java import static io.pactfoundation.consumer.dsl.LambdaDsl.newJsonArray; ... PactDslWithProvider builder = ... builder.given("some state") .uponReceiving("a request") .path("/my-app/my-service") .method("GET") .willRespondWith() .status(200) .body(newJsonArray((a) -> { a.stringValue("a1"); a.stringValue("a2"); }).build()); ``` ### Response body as json object ```java import static io.pactfoundation.consumer.dsl.LambdaDsl.newJsonBody; ... PactDslWithProvider builder = ... builder.given("some state") .uponReceiving("a request") .path("/my-app/my-service") .method("GET") .willRespondWith() .status(200) .body(newJsonBody((o) -> { o.stringValue("foo", "Foo"); o.stringValue("bar", "Bar"); }).build()); ``` ### Examples #### Simple Json object When creating simple json structures the difference between the two approaches isn't big. ##### JSON ```json { "bar": "Bar", "foo": "Foo" } ``` ##### Pact DSL ```java new PactDslJsonBody() .stringValue("foo", "Foo") .stringValue("bar", "Bar") ``` ##### Lambda DSL ```java newJsonBody((o) -> { o.stringValue("foo", "Foo"); o.stringValue("bar", "Bar"); }).build() ``` #### An array of arrays When we come to more complex constructs with arrays and nested objects the beauty of lambdas become visible! ##### JSON ```json [ ["a1", "a2"], [1, 2], [{"foo": "Foo"}] ] ``` ##### Pact DSL ```java new PactDslJsonArray() .array() .stringValue("a1") .stringValue("a2") .closeArray() .array() .numberValue(1) .numberValue(2) .closeArray() .array() .object() .stringValue("foo", "Foo") .closeObject() .closeArray() ``` ##### Lambda DSL ```java newJsonArray((rootArray) -> { rootArray.array((a) -> a.stringValue("a1").stringValue("a2")); rootArray.array((a) -> a.numberValue(1).numberValue(2)); rootArray.array((a) -> a.object((o) -> o.stringValue("foo", "Foo")); }).build() ```

# pact-jvm-consumer-java8 Provides a Java8 lambda based DSL for use with Junit to build consumer tests. # A Lambda DSL for Pact This is an extension for the pact DSL provided by [pact-jvm-consumer](../pact-jvm-consumer). The difference between the default pact DSL and this lambda DSL is, as the name suggests, the usage of lambdas. The use of lambdas makes the code much cleaner. ## Why a new DSL implementation? The lambda DSL solves the following two main issues. Both are visible in the following code sample: ```java new PactDslJsonArray() .array() # open an array .stringValue("a1") # choose the method that is valid for arrays .stringValue("a2") # choose the method that is valid for arrays .closeArray() # close the array .array() # open an array .numberValue(1) # choose the method that is valid for arrays .numberValue(2) # choose the method that is valid for arrays .closeArray() # close the array .array() # open an array .object() # now we work with an object .stringValue("foo", "Foo") # choose the method that is valid for objects .closeObject() # close the object and we're back in the array .closeArray() # close the array ``` ### The existing DSL is quite error-prone Methods may only be called in certain states. For example `object()` may only be called when you're currently working on an array whereas `object(name)` is only allowed to be called when working on an object. But both of the methods are available. You'll find out at runtime if you're using the correct method. Finally, the need for opening and closing objects and arrays makes usage cumbersome. The lambda DSL has no ambiguous methods and there's no need to close objects and arrays as all the work on such an object is wrapped in a lamda call. ### The existing DSL is hard to read When formatting your source code with an IDE the code becomes hard to read as there's no indentation possible. Of course, you could do it by hand but we want auto formatting! Auto formatting works great for the new DSL! ```java array.object((o) -> { o.stringValue("foo", "Foo"); # an attribute o.stringValue("bar", "Bar"); # an attribute o.object("tar", (tarObject) -> { # an attribute with a nested object tarObject.stringValue("a", "A"); # attribute of the nested object tarObject.stringValue("b", "B"); # attribute of the nested object }) }); ``` ## Installation ### Maven ``` <dependency> <groupId>au.com.dius</groupId> <artifactId>pact-jvm-consumer-java8_2.12</artifactId> <version>${pact.version}</version> </dependency> ``` ## Usage Start with a static import of `LambdaDsl`. This class contains factory methods for the lambda dsl extension. When you come accross the `body()` method of `PactDslWithProvider` builder start using the new extensions. The call to `LambdaDsl` replaces the call to instance `new PactDslJsonArray()` and `new PactDslJsonBody()` of the pact library. ```java io.pactfoundation.consumer.dsl.LambdaDsl.* ``` ### Response body as json array ```java import static io.pactfoundation.consumer.dsl.LambdaDsl.newJsonArray; ... PactDslWithProvider builder = ... builder.given("some state") .uponReceiving("a request") .path("/my-app/my-service") .method("GET") .willRespondWith() .status(200) .body(newJsonArray((a) -> { a.stringValue("a1"); a.stringValue("a2"); }).build()); ``` ### Response body as json object ```java import static io.pactfoundation.consumer.dsl.LambdaDsl.newJsonBody; ... PactDslWithProvider builder = ... builder.given("some state") .uponReceiving("a request") .path("/my-app/my-service") .method("GET") .willRespondWith() .status(200) .body(newJsonBody((o) -> { o.stringValue("foo", "Foo"); o.stringValue("bar", "Bar"); }).build()); ``` ### Examples #### Simple Json object When creating simple json structures the difference between the two approaches isn't big. ##### JSON ```json { "bar": "Bar", "foo": "Foo" } ``` ##### Pact DSL ```java new PactDslJsonBody() .stringValue("foo", "Foo") .stringValue("bar", "Bar") ``` ##### Lambda DSL ```java newJsonBody((o) -> { o.stringValue("foo", "Foo"); o.stringValue("bar", "Bar"); }).build(); ``` #### An array of arrays When we come to more complex constructs with arrays and nested objects the beauty of lambdas become visible! ##### JSON ```json [ ["a1", "a2"], [1, 2], [{"foo": "Foo"}] ] ``` ##### Pact DSL ```java new PactDslJsonArray() .array() .stringValue("a1") .stringValue("a2") .closeArray() .array() .numberValue(1) .numberValue(2) .closeArray() .array() .object() .stringValue("foo", "Foo") .closeObject() .closeArray(); ``` ##### Lambda DSL ```java newJsonArray((rootArray) -> { rootArray.array((a) -> a.stringValue("a1").stringValue("a2")); rootArray.array((a) -> a.numberValue(1).numberValue(2)); rootArray.array((a) -> a.object((o) -> o.stringValue("foo", "Foo"))); }).build(); ``` ##### Kotlin Lambda DSL ```kotlin newJsonArray { newArray { stringValue("a1") stringValue("a2") } newArray { numberValue(1) numberValue(2) } newArray { newObject { stringValue("foo", "Foo") } } } ```

# pact-jvm-consumer-java8 Provides a Java8 lambda based DSL for use with Junit to build consumer tests. # A Lambda DSL for Pact This is an extension for the pact DSL provided by [pact-jvm-consumer](../pact-jvm-consumer). The difference between the default pact DSL and this lambda DSL is, as the name suggests, the usage of lambdas. The use of lambdas makes the code much cleaner. ## Why a new DSL implementation? The lambda DSL solves the following two main issues. Both are visible in the following code sample: ```java new PactDslJsonArray() .array() # open an array .stringValue("a1") # choose the method that is valid for arrays .stringValue("a2") # choose the method that is valid for arrays .closeArray() # close the array .array() # open an array .numberValue(1) # choose the method that is valid for arrays .numberValue(2) # choose the method that is valid for arrays .closeArray() # close the array .array() # open an array .object() # now we work with an object .stringValue("foo", "Foo") # choose the method that is valid for objects .closeObject() # close the object and we're back in the array .closeArray() # close the array ``` ### The existing DSL is quite error-prone Methods may only be called in certain states. For example `object()` may only be called when you're currently working on an array whereas `object(name)` is only allowed to be called when working on an object. But both of the methods are available. You'll find out at runtime if you're using the correct method. Finally, the need for opening and closing objects and arrays makes usage cumbersome. The lambda DSL has no ambiguous methods and there's no need to close objects and arrays as all the work on such an object is wrapped in a lamda call. ### The existing DSL is hard to read When formatting your source code with an IDE the code becomes hard to read as there's no indentation possible. Of course, you could do it by hand but we want auto formatting! Auto formatting works great for the new DSL! ```java array.object((o) -> { o.stringValue("foo", "Foo"); # an attribute o.stringValue("bar", "Bar"); # an attribute o.object("tar", (tarObject) -> { # an attribute with a nested object tarObject.stringValue("a", "A"); # attribute of the nested object tarObject.stringValue("b", "B"); # attribute of the nested object }) }); ``` ## Installation ### Maven ``` <dependency> <groupId>au.com.dius</groupId> <artifactId>pact-jvm-consumer-java8</artifactId> <version>${pact.version}</version> </dependency> ``` ## Usage Start with a static import of `LambdaDsl`. This class contains factory methods for the lambda dsl extension. When you come accross the `body()` method of `PactDslWithProvider` builder start using the new extensions. The call to `LambdaDsl` replaces the call to instance `new PactDslJsonArray()` and `new PactDslJsonBody()` of the pact library. ```java io.pactfoundation.consumer.dsl.LambdaDsl.* ``` ### Response body as json array ```java import static io.pactfoundation.consumer.dsl.LambdaDsl.newJsonArray; ... PactDslWithProvider builder = ... builder.given("some state") .uponReceiving("a request") .path("/my-app/my-service") .method("GET") .willRespondWith() .status(200) .body(newJsonArray((a) -> { a.stringValue("a1"); a.stringValue("a2"); }).build()); ``` ### Response body as json object ```java import static io.pactfoundation.consumer.dsl.LambdaDsl.newJsonBody; ... PactDslWithProvider builder = ... builder.given("some state") .uponReceiving("a request") .path("/my-app/my-service") .method("GET") .willRespondWith() .status(200) .body(newJsonBody((o) -> { o.stringValue("foo", "Foo"); o.stringValue("bar", "Bar"); }).build()); ``` ### Examples #### Simple Json object When creating simple json structures the difference between the two approaches isn't big. ##### JSON ```json { "bar": "Bar", "foo": "Foo" } ``` ##### Pact DSL ```java new PactDslJsonBody() .stringValue("foo", "Foo") .stringValue("bar", "Bar") ``` ##### Lambda DSL ```java newJsonBody((o) -> { o.stringValue("foo", "Foo"); o.stringValue("bar", "Bar"); }).build() ``` #### An array of arrays When we come to more complex constructs with arrays and nested objects the beauty of lambdas become visible! ##### JSON ```json [ ["a1", "a2"], [1, 2], [{"foo": "Foo"}] ] ``` ##### Pact DSL ```java new PactDslJsonArray() .array() .stringValue("a1") .stringValue("a2") .closeArray() .array() .numberValue(1) .numberValue(2) .closeArray() .array() .object() .stringValue("foo", "Foo") .closeObject() .closeArray() ``` ##### Lambda DSL ```java newJsonArray((rootArray) -> { rootArray.array((a) -> a.stringValue("a1").stringValue("a2")); rootArray.array((a) -> a.numberValue(1).numberValue(2)); rootArray.array((a) -> a.object((o) -> o.stringValue("foo", "Foo")); }).build() ```

# pact-jvm-consumer-java8 Provides a Java8 lambda based DSL for use with Junit to build consumer tests. ## Dependency The library is available on maven central using: * group-id = `au.com.dius.pact.consumer` * artifact-id = `java8` * version-id = `4.1.x` # A Lambda DSL for Pact This is an extension for the pact DSL provided by [consumer](../consumer). The difference between the default pact DSL and this lambda DSL is, as the name suggests, the usage of lambdas. The use of lambdas makes the code much cleaner. ## Why a new DSL implementation? The lambda DSL solves the following two main issues. Both are visible in the following code sample: ```java new PactDslJsonArray() .array() # open an array .stringValue("a1") # choose the method that is valid for arrays .stringValue("a2") # choose the method that is valid for arrays .closeArray() # close the array .array() # open an array .numberValue(1) # choose the method that is valid for arrays .numberValue(2) # choose the method that is valid for arrays .closeArray() # close the array .array() # open an array .object() # now we work with an object .stringValue("foo", "Foo") # choose the method that is valid for objects .closeObject() # close the object and we're back in the array .closeArray() # close the array ``` ### The existing DSL is quite error-prone Methods may only be called in certain states. For example `object()` may only be called when you're currently working on an array whereas `object(name)` is only allowed to be called when working on an object. But both of the methods are available. You'll find out at runtime if you're using the correct method. Finally, the need for opening and closing objects and arrays makes usage cumbersome. The lambda DSL has no ambiguous methods and there's no need to close objects and arrays as all the work on such an object is wrapped in a lamda call. ### The existing DSL is hard to read When formatting your source code with an IDE the code becomes hard to read as there's no indentation possible. Of course, you could do it by hand but we want auto formatting! Auto formatting works great for the new DSL! ```java array.object((o) -> { o.stringValue("foo", "Foo"); # an attribute o.stringValue("bar", "Bar"); # an attribute o.object("tar", (tarObject) -> { # an attribute with a nested object tarObject.stringValue("a", "A"); # attribute of the nested object tarObject.stringValue("b", "B"); # attribute of the nested object }) }); ``` ## Installation ### Maven ``` <dependency> <groupId>au.com.dius.pact.consumer</groupId> <artifactId>java8</artifactId> <version>${pact.version}</version> </dependency> ``` ## Usage Start with a static import of `LambdaDsl`. This class contains factory methods for the lambda dsl extension. When you come accross the `body()` method of `PactDslWithProvider` builder start using the new extensions. The call to `LambdaDsl` replaces the call to instance `new PactDslJsonArray()` and `new PactDslJsonBody()` of the pact library. ```java io.pactfoundation.consumer.dsl.LambdaDsl.* ``` ### Response body as json array ```java import static io.pactfoundation.consumer.dsl.LambdaDsl.newJsonArray; ... PactDslWithProvider builder = ... builder.given("some state") .uponReceiving("a request") .path("/my-app/my-service") .method("GET") .willRespondWith() .status(200) .body(newJsonArray((a) -> { a.stringValue("a1"); a.stringValue("a2"); }).build()); ``` ### Response body as json object ```java import static io.pactfoundation.consumer.dsl.LambdaDsl.newJsonBody; ... PactDslWithProvider builder = ... builder.given("some state") .uponReceiving("a request") .path("/my-app/my-service") .method("GET") .willRespondWith() .status(200) .body(newJsonBody((o) -> { o.stringValue("foo", "Foo"); o.stringValue("bar", "Bar"); }).build()); ``` ### Examples #### Simple Json object When creating simple json structures the difference between the two approaches isn't big. ##### JSON ```json { "bar": "Bar", "foo": "Foo" } ``` ##### Pact DSL ```java new PactDslJsonBody() .stringValue("foo", "Foo") .stringValue("bar", "Bar") ``` ##### Lambda DSL ```java newJsonBody((o) -> { o.stringValue("foo", "Foo"); o.stringValue("bar", "Bar"); }).build(); ``` #### An array of arrays When we come to more complex constructs with arrays and nested objects the beauty of lambdas become visible! ##### JSON ```json [ ["a1", "a2"], [1, 2], [{"foo": "Foo"}] ] ``` ##### Pact DSL ```java new PactDslJsonArray() .array() .stringValue("a1") .stringValue("a2") .closeArray() .array() .numberValue(1) .numberValue(2) .closeArray() .array() .object() .stringValue("foo", "Foo") .closeObject() .closeArray(); ``` ##### Lambda DSL ```java newJsonArray((rootArray) -> { rootArray.array((a) -> a.stringValue("a1").stringValue("a2")); rootArray.array((a) -> a.numberValue(1).numberValue(2)); rootArray.array((a) -> a.object((o) -> o.stringValue("foo", "Foo"))); }).build(); ``` ##### Kotlin Lambda DSL ```kotlin newJsonArray { newArray { stringValue("a1") stringValue("a2") } newArray { numberValue(1) numberValue(2) } newArray { newObject { stringValue("foo", "Foo") } } } ``` # Test Analytics We are tracking anonymous analytics to gather important usage statistics like JVM version and operating system. To disable tracking, set the 'pact_do_not_track' system property or environment variable to 'true'.

# Pact Spring/JUnit runner ## Overview Library provides ability to play contract tests against a provider using Spring & JUnit. This library is based on and references the JUnit package, so see the [Pact JUnit 4](../pact-jvm-provider-junit) or [Pact JUnit 5](../pact-jvm-provider-junit5) providers for more details regarding configuration using JUnit. Supports: - Standard ways to load pacts from folders and broker - Easy way to change assertion strategy - Spring Test MockMVC Controllers and ControllerAdvice using MockMvc standalone setup. - MockMvc debugger output - Multiple @State runs to test a particular Provider State multiple times - **au.com.dius.pact.provider.junit.State** custom annotation - before each interaction that requires a state change, all methods annotated by `@State` with appropriate the state listed will be invoked. **NOTE:** For publishing provider verification results to a pact broker, make sure the Java system property `pact.provider.version` is set with the version of your provider. ## Example of MockMvc test ```java @RunWith(RestPactRunner.class) // Custom pact runner, child of PactRunner which runs only REST tests @Provider("myAwesomeService") // Set up name of tested provider @PactFolder("pacts") // Point where to find pacts (See also section Pacts source in documentation) public class ContractTest { //Create an instance of your controller. We cannot autowire this as we're not using (and don't want to use) a Spring test runner. @InjectMocks private AwesomeController awesomeController = new AwesomeController(); //Mock your service logic class. We'll use this to create scenarios for respective provider states. @Mock private AwesomeBusinessLogic awesomeBusinessLogic; //Create an instance of your controller advice (if you have one). This will be passed to the MockMvcTarget constructor to be wired up with MockMvc. @InjectMocks private AwesomeControllerAdvice awesomeControllerAdvice = new AwesomeControllerAdvice(); //Create a new instance of the MockMvcTarget and annotate it as the TestTarget for PactRunner @TestTarget public final MockMvcTarget target = new MockMvcTarget(); @Before //Method will be run before each test of interaction public void before() { //initialize your mocks using your mocking framework MockitoAnnotations.initMocks(this); //configure the MockMvcTarget with your controller and controller advice target.setControllers(awesomeController); target.setControllerAdvice(awesomeControllerAdvice); } @State("default", "no-data") // Method will be run before testing interactions that require "default" or "no-data" state public void toDefaultState() { target.setRunTimes(3); //let's loop through this state a few times for a 3 data variants when(awesomeBusinessLogic.getById(any(UUID.class))) .thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.ONE)) .thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.TWO)) .thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.THREE)); } @State("error-case") public void SingleUploadExistsState_Success() { target.setRunTimes(1); //tell the runner to only loop one time for this state //you might want to throw exceptions to be picked off by your controller advice when(awesomeBusinessLogic.getById(any(UUID.class))) .then(i -> { throw new NotCoolException(i.getArgumentAt(0, UUID.class).toString()); }); } } ``` ## Using a Spring runner (version 3.5.7+) You can use `SpringRestPactRunner` instead of the default Pact runner to use the Spring test annotations. This will allow you to inject or mock spring beans. For example: ```java @RunWith(SpringRestPactRunner.class) @Provider("pricing") @PactBroker(protocol = "https", host = "${pactBrokerHost}", port = "443", authentication = @PactBrokerAuth(username = "${pactBrokerUser}", password = "${pactBrokerPassword}")) @SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.DEFINED_PORT) public class PricingServiceProviderPactTest { @MockBean private ProductClient productClient; // This will replace the bean with a mock in the application context @TestTarget @SuppressWarnings(value = "VisibilityModifier") public final Target target = new HttpTarget(8091); @State("Product X010000021 exists") public void setupProductX010000021() throws IOException { reset(productClient); ProductBuilder product = new ProductBuilder() .withProductCode("X010000021"); when(productClient.fetch((Set<String>) argThat(contains("X010000021")), any())).thenReturn(product); } @State("the product code X00001 can be priced") public void theProductCodeX00001CanBePriced() throws IOException { reset(productClient); ProductBuilder product = new ProductBuilder() .withProductCode("X00001"); when(productClient.find((Set<String>) argThat(contains("X00001")), any())).thenReturn(product); } } ``` ### Using Spring Context Properties (version 3.5.14+) From version 3.5.14 onwards, the SpringRestPactRunner will look up any annotation expressions (like `${pactBrokerHost}`) above) from the Spring context. For Springboot, this will allow you to define the properties in the application test properties. For instance, if you create the following `application.yml` in the test resources: ```yaml pactbroker: host: "your.broker.local" port: "443" protocol: "https" auth: username: "<your broker username>" password: "<your broker password>" ``` Then you can use the defaults on the `@PactBroker` annotation. ```java @RunWith(SpringRestPactRunner.class) @Provider("My Service") @PactBroker( authentication = @PactBrokerAuth(username = "${pactbroker.auth.username}", password = "${pactbroker.auth.password}") ) @SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT) public class PactVerificationTest { ``` ### Using a random port with a Springboot test (version 3.5.14+) If you use a random port in a springboot test (by setting `SpringBootTest.WebEnvironment.RANDOM_PORT`), you can use the `SpringBootHttpTarget` which will get the application port from the spring application context. For example: ```java @RunWith(SpringRestPactRunner.class) @Provider("My Service") @PactBroker @SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT) public class PactVerificationTest { @TestTarget public final Target target = new SpringBootHttpTarget(); } ```

pact-jvm-consumer-junit5 ======================== JUnit 5 support for Pact consumer tests ## Dependency The library is available on maven central using: * group-id = `au.com.dius` * artifact-id = `pact-jvm-consumer-junit5_2.12` * version-id = `3.6.x` ## Usage ### 1. Add the Pact consumer test extension to the test class. To write Pact consumer tests with JUnit 5, you need to add `@ExtendWith(PactConsumerTestExt)` to your test class. This replaces the `PactRunner` used for JUnit 4 tests. The rest of the test follows a similar pattern as for JUnit 4 tests. ```java @ExtendWith(PactConsumerTestExt.class) class ExampleJavaConsumerPactTest { ``` ### 2. create a method annotated with `@Pact` that returns the interactions for the test For each test (as with JUnit 4), you need to define a method annotated with the `@Pact` annotation that returns the interactions for the test. ```java @Pact(provider="ArticlesProvider", consumer="test_consumer") public RequestResponsePact createPact(PactDslWithProvider builder) { return builder .given("test state") .uponReceiving("ExampleJavaConsumerPactTest test interaction") .path("/articles.json") .method("GET") .willRespondWith() .status(200) .body("{\"responsetest\": true}") .toPact(); } ``` ### 3. Link the mock server with the interactions for the test with `@PactTestFor` Then the final step is to use the `@PactTestFor` annotation to tell the Pact extension how to setup the Pact test. You can either put this annotation on the test class, or on the test method. For examples see [ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) and [MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy). The `@PactTestFor` annotation allows you to control the mock server in the same way as the JUnit 4 `PactProviderRule`. It allows you to set the hostname to bind to (default is `localhost`) and the port (default is to use a random port). You can also set the Pact specification version to use (default is V3). ```java @ExtendWith(PactConsumerTestExt.class) @PactTestFor(providerName = "ArticlesProvider") public class ExampleJavaConsumerPactTest { ``` **NOTE on the hostname**: The mock server runs in the same JVM as the test, so the only valid values for hostname are: | hostname | result | | -------- | ------ | | `localhost` | binds to the address that localhost points to (normally the loopback adapter) | | `127.0.0.1` or `::1` | binds to the loopback adapter | | host name | binds to the default interface that the host machines DNS name resolves to | | `0.0.0.0` or `::` | binds to the all interfaces on the host machine | #### Matching the interactions by provider name If you set the `providerName` on the `@PactTestFor` annotation, then the first method with a `@Pact` annotation with the same provider name will be used. See [ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) for an example. #### Matching the interactions by method name If you set the `pactMethod` on the `@PactTestFor` annotation, then the method with the provided name will be used (it still needs a `@Pact` annotation). See [MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy) for an example. ### Injecting the mock server into the test You can get the mock server injected into the test method by adding a `MockServer` parameter to the test method. ```java @Test void test(MockServer mockServer) throws IOException { HttpResponse httpResponse = Request.Get(mockServer.getUrl() + "/articles.json").execute().returnResponse(); assertThat(httpResponse.getStatusLine().getStatusCode(), is(equalTo(200))); } ``` This helps with getting the base URL of the mock server, especially when a random port is used. ## Changing the directory pact files are written to By default, pact files are written to `target/pacts` (or `build/pacts` if you use Gradle), but this can be overwritten with the `pact.rootDir` system property. This property needs to be set on the test JVM as most build tools will fork a new JVM to run the tests. For Gradle, add this to your build.gradle: ```groovy test { systemProperties['pact.rootDir'] = "$buildDir/custom-pacts-directory" } ``` For maven, use the systemPropertyVariables configuration: ```xml <project> [...] <build> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-surefire-plugin</artifactId> <version>2.18</version> <configuration> <systemPropertyVariables> <pact.rootDir>some/other/directory</pact.rootDir> <buildDirectory>${project.build.directory}</buildDirectory> [...] </systemPropertyVariables> </configuration> </plugin> </plugins> </build> [...] </project> ``` For SBT: ```scala fork in Test := true, javaOptions in Test := Seq("-Dpact.rootDir=some/other/directory") ``` ### Using `@PactFolder` annotation [3.6.2+] You can override the directory the pacts are written in a test by adding the `@PactFolder` annotation to the test class. ## Forcing pact files to be overwritten (3.6.5+) By default, when the pact file is written, it will be merged with any existing pact file. To force the file to be overwritten, set the Java system property `pact.writer.overwrite` to `true`. ## Unsupported The current implementation does not support tests with multiple providers. This will be added in a later release. # Having values injected from provider state callbacks (3.6.11+) You can have values from the provider state callbacks be injected into most places (paths, query parameters, headers, bodies, etc.). This works by using the V3 spec generators with provider state callbacks that return values. One example of where this would be useful is API calls that require an ID which would be auto-generated by the database on the provider side, so there is no way to know what the ID would be beforehand. The following DSL methods all you to set an expression that will be parsed with the values returned from the provider states: For JSON bodies, use `valueFromProviderState`.<br/> For headers, use `headerFromProviderState`.<br/> For query parameters, use `queryParameterFromProviderState`.<br/> For paths, use `pathFromProviderState`. For example, assume that an API call is made to get the details of a user by ID. A provider state can be defined that specifies that the user must be exist, but the ID will be created when the user is created. So we can then define an expression for the path where the ID will be replaced with the value returned from the provider state callback. ```java .pathFromProviderState("/api/users/${id}", "/api/users/100") ``` You can also just use the key instead of an expression: ```java .valueFromProviderState('userId', 'userId', 100) // will look value using userId as the key ```

pact-jvm-consumer-junit5 ======================== JUnit 5 support for Pact consumer tests ## Dependency The library is available on maven central using: * group-id = `au.com.dius` * artifact-id = `pact-jvm-consumer-junit5` * version-id = `4.0.x` ## Usage ### 1. Add the Pact consumer test extension to the test class. To write Pact consumer tests with JUnit 5, you need to add `@ExtendWith(PactConsumerTestExt)` to your test class. This replaces the `PactRunner` used for JUnit 4 tests. The rest of the test follows a similar pattern as for JUnit 4 tests. ```java @ExtendWith(PactConsumerTestExt.class) class ExampleJavaConsumerPactTest { ``` ### 2. create a method annotated with `@Pact` that returns the interactions for the test For each test (as with JUnit 4), you need to define a method annotated with the `@Pact` annotation that returns the interactions for the test. ```java @Pact(provider="ArticlesProvider", consumer="test_consumer") public RequestResponsePact createPact(PactDslWithProvider builder) { return builder .given("test state") .uponReceiving("ExampleJavaConsumerPactTest test interaction") .path("/articles.json") .method("GET") .willRespondWith() .status(200) .body("{\"responsetest\": true}") .toPact(); } ``` ### 3. Link the mock server with the interactions for the test with `@PactTestFor` Then the final step is to use the `@PactTestFor` annotation to tell the Pact extension how to setup the Pact test. You can either put this annotation on the test class, or on the test method. For examples see [ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) and [MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy). The `@PactTestFor` annotation allows you to control the mock server in the same way as the JUnit 4 `PactProviderRule`. It allows you to set the hostname to bind to (default is `localhost`) and the port (default is to use a random port). You can also set the Pact specification version to use (default is V3). ```java @ExtendWith(PactConsumerTestExt.class) @PactTestFor(providerName = "ArticlesProvider") public class ExampleJavaConsumerPactTest { ``` **NOTE on the hostname**: The mock server runs in the same JVM as the test, so the only valid values for hostname are: | hostname | result | | -------- | ------ | | `localhost` | binds to the address that localhost points to (normally the loopback adapter) | | `127.0.0.1` or `::1` | binds to the loopback adapter | | host name | binds to the default interface that the host machines DNS name resolves to | | `0.0.0.0` or `::` | binds to the all interfaces on the host machine | #### Matching the interactions by provider name If you set the `providerName` on the `@PactTestFor` annotation, then the first method with a `@Pact` annotation with the same provider name will be used. See [ArticlesTest](src/test/java/au/com/dius/pact/consumer/junit5/ArticlesTest.java) for an example. #### Matching the interactions by method name If you set the `pactMethod` on the `@PactTestFor` annotation, then the method with the provided name will be used (it still needs a `@Pact` annotation). See [MultiTest](src/test/groovy/au/com/dius/pact/consumer/junit5/MultiTest.groovy) for an example. ### Injecting the mock server into the test You can get the mock server injected into the test method by adding a `MockServer` parameter to the test method. ```java @Test void test(MockServer mockServer) throws IOException { HttpResponse httpResponse = Request.Get(mockServer.getUrl() + "/articles.json").execute().returnResponse(); assertThat(httpResponse.getStatusLine().getStatusCode(), is(equalTo(200))); } ``` This helps with getting the base URL of the mock server, especially when a random port is used. ## Changing the directory pact files are written to By default, pact files are written to `target/pacts` (or `build/pacts` if you use Gradle), but this can be overwritten with the `pact.rootDir` system property. This property needs to be set on the test JVM as most build tools will fork a new JVM to run the tests. For Gradle, add this to your build.gradle: ```groovy test { systemProperties['pact.rootDir'] = "$buildDir/custom-pacts-directory" } ``` For maven, use the systemPropertyVariables configuration: ```xml <project> [...] <build> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-surefire-plugin</artifactId> <version>2.18</version> <configuration> <systemPropertyVariables> <pact.rootDir>some/other/directory</pact.rootDir> <buildDirectory>${project.build.directory}</buildDirectory> [...] </systemPropertyVariables> </configuration> </plugin> </plugins> </build> [...] </project> ``` For SBT: ```scala fork in Test := true, javaOptions in Test := Seq("-Dpact.rootDir=some/other/directory") ``` ### Using `@PactFolder` annotation You can override the directory the pacts are written in a test by adding the `@PactFolder` annotation to the test class. ## Forcing pact files to be overwritten (3.6.5+) By default, when the pact file is written, it will be merged with any existing pact file. To force the file to be overwritten, set the Java system property `pact.writer.overwrite` to `true`. ## Unsupported The current implementation does not support tests with multiple providers. This will be added in a later release. # Having values injected from provider state callbacks (3.6.11+) You can have values from the provider state callbacks be injected into most places (paths, query parameters, headers, bodies, etc.). This works by using the V3 spec generators with provider state callbacks that return values. One example of where this would be useful is API calls that require an ID which would be auto-generated by the database on the provider side, so there is no way to know what the ID would be beforehand. The following DSL methods all you to set an expression that will be parsed with the values returned from the provider states: For JSON bodies, use `valueFromProviderState`.<br/> For headers, use `headerFromProviderState`.<br/> For query parameters, use `queryParameterFromProviderState`.<br/> For paths, use `pathFromProviderState`. For example, assume that an API call is made to get the details of a user by ID. A provider state can be defined that specifies that the user must be exist, but the ID will be created when the user is created. So we can then define an expression for the path where the ID will be replaced with the value returned from the provider state callback. ```java .pathFromProviderState("/api/users/${id}", "/api/users/100") ``` You can also just use the key instead of an expression: ```java .valueFromProviderState('userId', 'userId', 100) // will look value using userId as the key ```

# Pact Spring/JUnit runner ## Overview Library provides ability to play contract tests against a provider using Spring & JUnit. This library is based on and references the JUnit package, so see [junit provider support](pact-jvm-provider-junit) for more details regarding configuration using JUnit. Supports: - Standard ways to load pacts from folders and broker - Easy way to change assertion strategy - Spring Test MockMVC Controllers and ControllerAdvice using MockMvc standalone setup. - MockMvc debugger output - Multiple @State runs to test a particular Provider State multiple times - **au.com.dius.pact.provider.junit.State** custom annotation - before each interaction that requires a state change, all methods annotated by `@State` with appropriate the state listed will be invoked. **NOTE:** For publishing provider verification results to a pact broker, make sure the Java system property `pact.provider.version` is set with the version of your provider. ## Example of MockMvc test ```java @RunWith(RestPactRunner.class) // Custom pact runner, child of PactRunner which runs only REST tests @Provider("myAwesomeService") // Set up name of tested provider @PactFolder("pacts") // Point where to find pacts (See also section Pacts source in documentation) public class ContractTest { //Create an instance of your controller. We cannot autowire this as we're not using (and don't want to use) a Spring test runner. @InjectMocks private AwesomeController awesomeController = new AwesomeController(); //Mock your service logic class. We'll use this to create scenarios for respective provider states. @Mock private AwesomeBusinessLogic awesomeBusinessLogic; //Create an instance of your controller advice (if you have one). This will be passed to the MockMvcTarget constructor to be wired up with MockMvc. @InjectMocks private AwesomeControllerAdvice awesomeControllerAdvice = new AwesomeControllerAdvice(); //Create a new instance of the MockMvcTarget and annotate it as the TestTarget for PactRunner @TestTarget public final MockMvcTarget target = new MockMvcTarget(); @Before //Method will be run before each test of interaction public void before() { //initialize your mocks using your mocking framework MockitoAnnotations.initMocks(this); //configure the MockMvcTarget with your controller and controller advice target.setControllers(awesomeController); target.setControllerAdvice(awesomeControllerAdvice); } @State("default", "no-data") // Method will be run before testing interactions that require "default" or "no-data" state public void toDefaultState() { target.setRunTimes(3); //let's loop through this state a few times for a 3 data variants when(awesomeBusinessLogic.getById(any(UUID.class))) .thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.ONE)) .thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.TWO)) .thenReturn(myTestHelper.generateRandomReturnData(UUID.randomUUID(), ExampleEnum.THREE)); } @State("error-case") public void SingleUploadExistsState_Success() { target.setRunTimes(1); //tell the runner to only loop one time for this state //you might want to throw exceptions to be picked off by your controller advice when(awesomeBusinessLogic.getById(any(UUID.class))) .then(i -> { throw new NotCoolException(i.getArgumentAt(0, UUID.class).toString()); }); } } ``` ## Using a Spring runner (version 3.5.7+) You can use `SpringRestPactRunner` instead of the default Pact runner to use the Spring test annotations. This will allow you to inject or mock spring beans. For example: ```java @RunWith(SpringRestPactRunner.class) @Provider("pricing") @PactBroker(protocol = "https", host = "${pactBrokerHost}", port = "443", authentication = @PactBrokerAuth(username = "${pactBrokerUser}", password = "${pactBrokerPassword}")) @SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.DEFINED_PORT) public class PricingServiceProviderPactTest { @MockBean private ProductClient productClient; // This will replace the bean with a mock in the application context @TestTarget @SuppressWarnings(value = "VisibilityModifier") public final Target target = new HttpTarget(8091); @State("Product X010000021 exists") public void setupProductX010000021() throws IOException { reset(productClient); ProductBuilder product = new ProductBuilder() .withProductCode("X010000021"); when(productClient.fetch((Set<String>) argThat(contains("X010000021")), any())).thenReturn(product); } @State("the product code X00001 can be priced") public void theProductCodeX00001CanBePriced() throws IOException { reset(productClient); ProductBuilder product = new ProductBuilder() .withProductCode("X00001"); when(productClient.find((Set<String>) argThat(contains("X00001")), any())).thenReturn(product); } } ``` ### Using Spring Context Properties (version 3.5.14+) From version 3.5.14 onwards, the SpringRestPactRunner will look up any annotation expressions (like `${pactBrokerHost}`) above) from the Spring context. For Springboot, this will allow you to define the properties in the application test properties. For instance, if you create the following `application.yml` in the test resources: ```yaml pactbroker: host: "your.broker.local" port: "443" protocol: "https" auth: username: "<your broker username>" password: "<your broker password>" ``` Then you can use the defaults on the `@PactBroker` annotation. ```java @RunWith(SpringRestPactRunner.class) @Provider("My Service") @PactBroker( authentication = @PactBrokerAuth(username = "${pactbroker.auth.username}", password = "${pactbroker.auth.password}") ) @SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT) public class PactVerificationTest { ``` ### Using a random port with a Springboot test (version 3.5.14+) If you use a random port in a springboot test (by setting `SpringBootTest.WebEnvironment.RANDOM_PORT`), you can use the `SpringBootHttpTarget` which will get the application port from the spring application context. For example: ```java @RunWith(SpringRestPactRunner.class) @Provider("My Service") @PactBroker @SpringBootTest(webEnvironment = SpringBootTest.WebEnvironment.RANDOM_PORT) public class PactVerificationTest { @TestTarget public final Target target = new SpringBootHttpTarget(); } ```